メインコンテンツにスキップ

はじめに

This guide will show you how to replace the motherboard on the Samsung WB1100F. It will show you a step by step replacement guide of how to remove all components leading up to and including the motherboard.

パーツ

パーツは指定されていません。

  1. Samsung WB1100F Motherboard Replacement, LCD Screen Cover: 手順 1、 2の画像 1 Samsung WB1100F Motherboard Replacement, LCD Screen Cover: 手順 1、 2の画像 2
    • Remove six 1.2 mm Phillips #00 screws connected to the tripod dock and adjacent screws.

    • Remove six 1.2 mm Phillips #00 screws from the side of the camera.

  2. Samsung WB1100F Motherboard Replacement: 手順 2、 2の画像 1 Samsung WB1100F Motherboard Replacement: 手順 2、 2の画像 2
    • Use a plastic opening tool or spudger if available.

    • Using the flat end of a spudger, loosen the connection between the back panel and the device. Remove the back panel using your hands.

  3. Samsung WB1100F Motherboard Replacement, LCD Screen: 手順 3、 2の画像 1 Samsung WB1100F Motherboard Replacement, LCD Screen: 手順 3、 2の画像 2
    • Remove four 1.2 mm Phillips #1 screws connected to the LCD screen.

  4. Samsung WB1100F Motherboard Replacement: 手順 4、 3の画像 1 Samsung WB1100F Motherboard Replacement: 手順 4、 3の画像 2 Samsung WB1100F Motherboard Replacement: 手順 4、 3の画像 3
    • Flip the LCD screen over to reveal the display cable.

    • Use the tip of a spudger or your fingernail to flip up the small retaining flap on the display cable ZIF connector.

    • Be sure you are prying up on the hinged retaining flap, not the connector itself.

    • Using a pair of tweezers, remove the ribbon cable from its socket on the motherboard.

    • The white line on this ribbon cable marks the edge of the connection area. To reinstall, insert the cable into the connector up to this line, and then close the retaining flap. If the cable doesn’t insert easily up to (or very near to) this line, it’s probably misaligned and needs to be gently removed and repositioned.

  5. Samsung WB1100F Motherboard Replacement, Motherboard: 手順 5、 1の画像 1
    • Remove two 1.2 Phillips #00 screws connected to the motherboard.

  6. Samsung WB1100F Motherboard Replacement: 手順 6、 1の画像 1
    • Desolder five wires connected to the camera motherboard.

  7. Samsung WB1100F Motherboard Replacement: 手順 7、 2の画像 1 Samsung WB1100F Motherboard Replacement: 手順 7、 2の画像 2
    • Use the tip of a spudger or your fingernail to flip up the small retaining flaps on the five ZIF connectors on the motherboard.

    • Be sure you are prying up on the hinged retaining flap, not the connector itself.

    • Detach the five ribbon cables from the camera motherboard.

    • The white line on the ribbon cables mark the edge of the connection area. To reinstall, insert the cables into the connector up to this line, and then close the retaining flap. If a cable doesn’t insert easily up to (or very near to) this line, it’s probably misaligned and needs to be gently removed and repositioned.

  8. Samsung WB1100F Motherboard Replacement: 手順 8、 1の画像 1
    • Gently remove the motherboard.

終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

Jesse Lindsey

メンバー登録日: 2016年05月13日

581 ポイント

5のガイドは作成済み

チーム

Metro State, Team 1-1, Carpenter SU 2016 Metro State, Team 1-1, Carpenter SU 2016人のメンバー

MSU-CARPENTER-SU16S1G1

3 メンバー

5のガイドは作成済み

コメント1件

Great Jesse, I can say the same applies for the WB100, I get one and I already disassembly it to fix humidity condensation in the top buttons, unfortunately the flash stops working..

Congratulation for your post. Enrique

egyr - 返信

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 12

今までの合計 718