メインコンテンツにスキップ

はじめに

Use this guide to replace the rear panel and LCD screen cover of the Samsung WB1100F. The screen cover is part of the rear body of the camera. The cover is highly susceptible to scratching and cracking.

パーツ

パーツは指定されていません。

  1. Remove six 1.2 mm Phillips #00 screws connected to the tripod dock and adjacent screws. Remove six 1.2 mm Phillips #00 screws from the side of the camera.
    • Remove six 1.2 mm Phillips #00 screws connected to the tripod dock and adjacent screws.

    • Remove six 1.2 mm Phillips #00 screws from the side of the camera.

  2. Use a plastic opening tool or spudger if available. Using the flat end of a spudger, loosen the connection between the back panel and the device. Remove the back  panel using your hands.
    • Use a plastic opening tool or spudger if available.

    • Using the flat end of a spudger, loosen the connection between the back panel and the device. Remove the back panel using your hands.

終わりに

To reassemble your device, follow these instructions in reverse order.

Jesse Lindsey

メンバー登録日: 2016年05月13日

530 ポイント

5のガイドは作成済み

チーム

Metro State, Team 1-1, Carpenter SU 2016 Metro State, Team 1-1, Carpenter SU 2016人のメンバー

MSU-CARPENTER-SU16S1G1

3 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 157