Remove the 2 screws on the back cover using a Phillips head #0 screwdriver. Remove the 2 screws on the back cover using a Phillips head #0 screwdriver.
  • Remove the 2 screws on the back cover using a Phillips head #0 screwdriver.

コメントを追加する

Remove the screw on each side of the device using a Phillips head screwdriver. Remove the screw on each side of the device using a Phillips head screwdriver.
  • Remove the screw on each side of the device using a Phillips head screwdriver.

コメントを追加する

Using the plastic opening kit, place the prying end of the kit into the opening created by removing the screws. Gently pry open the back cover. Insert the plastic opening tool in between the cover joints. Gently pry open the back cover. Insert the plastic opening tool in between the cover joints.
  • Using the plastic opening kit, place the prying end of the kit into the opening created by removing the screws.

  • Gently pry open the back cover. Insert the plastic opening tool in between the cover joints.

コメントを追加する

Once the back cover has been removed the battery will be visible. Pry the battery from the device.
  • Once the back cover has been removed the battery will be visible.

  • Pry the battery from the device.

    • NOTE: The battery should still be connected to the device

コメントを追加する

Unplug the battery connecting cables. NOTE: The battery now should be free from all connections to the device.
  • Unplug the battery connecting cables.

    • NOTE: The battery now should be free from all connections to the device.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Dylan Peters

メンバー登録日: 2013年10月18日

404 ポイント

4のガイドは作成済み

チーム

Clemson, Team 14-8, Benson Fall 2013 Clemson, Team 14-8, Benson Fall 2013人のメンバー

CLEM-BENSON-F13S14G8

3 メンバー

7のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 5

今までの合計 1,119