Samsung Series 9 NP900X3A Back Panel Replacement - iFixit 修理ガイド

必要な工具と部品

手順1 Back Panel

Samsung Series 9 NP900X3A Back Panel Replacement, Back Panel: 手順 1、 1の画像 1

Locate the rubber feet at every corner of the laptop back panel. Use the ifixit prying tool, and break the adhesive between the rubber feet, and the case.
Screws securing the back panel underneath the adhesive will be exposed.
Removing the rubber feet will weaken the adhesive making reassembly difficult. Apply new adhesive if you choose to place the rubber feet back on to the device.

手順2

Samsung Series 9 NP900X3A Back Panel Replacement: 手順 2、 1の画像 1

Use a Phillips #0 screwdriver to remove the ten 0.2mm screws from the bottom cover.
Keep track of the screws and their placement on the laptop. This will help make reassembly easier and more organized.

手順3

Samsung Series 9 NP900X3A Back Panel Replacement: 手順 3、 3の画像 1

Samsung Series 9 NP900X3A Back Panel Replacement: 手順 3、 3の画像 2

Samsung Series 9 NP900X3A Back Panel Replacement: 手順 3、 3の画像 3

Find an opening on the back of the laptop. Use the plastic prying tool to help pry open the back panel of the laptop.
Use both hands when removing the back case cover. Too much force will bend the cover making it difficult to reassemble.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

3人の作成者と共同で作成されました。

Zahir Sanchez

メンバー登録日: 02/08/18

493 ポイント

3のガイドは作成済み

+4 個以上のバッジ

チーム

University of North Texas, Team S2-G4, Thomas Spring 2018 University of North Texas, Team S2-G4, Thomas Spring 2018人のメンバー

UNT-THOMAS-S18S2G4

3 メンバー

5のガイドは作成済み

0 件のコメント

統計データ:

過去 24時間: 1

過去 7 日: 2

過去 30 日: 11

今までの合計 1,100