メインコンテンツにスキップ

Fix Your Stuff

Right to Repair

Parts & Tools

はじめに

To get to key parts of the computer, such as the disc drive and the motherboard, you will have to remove the two bottom panels of the computer. Once you have done this, you will be able to get to the innards of the computer for repairs or replacements. This guide will walk you through the steps of removing these panels.

  1. Place the computer upside down, with the battery pack facing away from you.
    • Place the computer upside down, with the battery pack facing away from you.

  2. Remove the battery by pushing out the locks on either end then pushing the battery away from you. Remove the battery by pushing out the locks on either end then pushing the battery away from you.
    • Remove the battery by pushing out the locks on either end then pushing the battery away from you.

  3. Using the J0 Japanese Industrial Standard screwdriver, remove the 4.5mm screw on the ODD/HDD Memory panel.
    • Using the J0 Japanese Industrial Standard screwdriver, remove the 4.5mm screw on the ODD/HDD Memory panel.

  4. Pull the panel towards you to release it, then lift it off the computer. Pull the panel towards you to release it, then lift it off the computer.
    • Pull the panel towards you to release it, then lift it off the computer.

  5. Using the J0 Japanese Industrial Standard screwdriver, remove the 4.5mm screw next to the label “ODD."
    • Using the J0 Japanese Industrial Standard screwdriver, remove the 4.5mm screw next to the label “ODD."

    • Remove the three 4.5mm screws from around the memory drive nest.

  6. Using the J1 Japanese Industrial Standard screwdriver, remove the thirteen 9.5mm screws from the panel that cover the bottom of the computer.
    • Using the J1 Japanese Industrial Standard screwdriver, remove the thirteen 9.5mm screws from the panel that cover the bottom of the computer.

  7. Begin removing the computer casing by prying beside the disk drive with the iFixit opening tool and the spudger,  working counterclockwise. Lift the panel from the computer. Lift the panel from the computer.
    • Begin removing the computer casing by prying beside the disk drive with the iFixit opening tool and the spudger, working counterclockwise.

    • Lift the panel from the computer.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Timothy Johnson

メンバー登録日: 2019年02月14日

616 ポイント

5のガイドは作成済み

チーム

Carson-Newman University, Team S1-G1, Sobiech Spring 2019 Carson-Newman University, Team S1-G1, Sobiech Spring 2019人のメンバー

CNU-SOBIECH-S19S1G1

5 メンバー

6のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 10

今までの合計 107