メインコンテンツにスキップ

パーツ

パーツは指定されていません。

  1. Remove these screws from the camera using a phillips head screwdriver. Remove these screws from the camera using a phillips head screwdriver. Remove these screws from the camera using a phillips head screwdriver.
    • Remove these screws from the camera using a phillips head screwdriver.

  2. Lay the camera down on the table and remove the metal shell from the front.
    • Lay the camera down on the table and remove the metal shell from the front.

  3. Wedge a spudger/flathead screwdriver inside of the shell where the screws were to pry the shell off of the back.
    • Wedge a spudger/flathead screwdriver inside of the shell where the screws were to pry the shell off of the back.

  4. Apple Watch キット

    スクリーンとバッテリー の修理が簡単にできます。

    ショップを見る

    Apple Watch キット

    スクリーンとバッテリー の修理が簡単にできます。

    ショップを見る
  5. Remove the shell the from the back of the camera.
    • Remove the shell the from the back of the camera.

  6. Remove the Phillips head screw from the rear panel control board to reveal the LCD's connection to the motherboard.
    • Remove the Phillips head screw from the rear panel control board to reveal the LCD's connection to the motherboard.

  7. Use a spudger to flip up the light gray lever(as shown in the photo). This will release the screen so that you may pull it out.
    • Use a spudger to flip up the light gray lever(as shown in the photo). This will release the screen so that you may pull it out.

  8. Pull the screen out of the mother board.
    • Pull the screen out of the mother board.

まとめ

To reassemble your device, follow these instructions in reverse order.

4 の人々がこのガイドを完成させました。

Nicholas Pavao

メンバー登録日: 2015年03月27日

397 ポイント

3のガイドは作成済み

チーム

UMass Dartmouth, Team 2-1, Shastany Spring 2015 UMass Dartmouth, Team 2-1, Shastany Spring 2015人のメンバー

UMASSD-SHASTANY-S15S2G1

4 メンバー

4のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 4

今までの合計 612