Samsung SGH-A737 Screen Replacement - iFixit 修理ガイド

必要な工具と部品

手順1 Screen

Remove battery from the back of the device.

手順2

Use a Phillips head screw driver to unscrew six screws on back on the device.

手順3

Using the same screw driver, slide up the screen and remove two more screws beside the camera.

手順4

Remove side buttons and pop out circuit board, this will expose two more screws. Remove these and keep them separate from the rest.

手順5

Remove the Samsung sticker to expose two metal tabs.

手順6

Samsung SGH-A737 Screen Replacement: 手順 6、 1の画像 1

Peel off the black strip to expose two screws. Remove these.

手順7

Samsung SGH-A737 Screen Replacement: 手順 7、 1の画像 1

Use a Phillips head screwdriver to remove the four screws on the back of the screen.

手順8

Samsung SGH-A737 Screen Replacement: 手順 8、 1の画像 1

Once you have exposed the circuit board, peel off the green tape at the bottom. This will allow the removal of the screen.

手順9

Before removing the screen, disconnect the orange tape at the top of the circuit board. You can do this by opening up the small lock.
With the lock opened, the circuit board will automatically detach when you pull it out in step 11.

手順10

Use a flathead screwdriver to reach under the circuit board and pry it up. You should hear a tearing sound; this is the glue separating from the screen.

手順11

Once you have pried it up, the screen should come out easily. The camera and its microphone are attached at the top(outlined in red).
With the screen removed, you can then put the new one in. You must attach the orange strip to the new circuit board to properly install it.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

4人の作成者と共同で作成されました。

Tommy

メンバー登録日: 02/19/16

101 ポイント

2のガイドは作成済み

チーム

Ohio State, Team 1-3, Garvin Spring 2016 Ohio State, Team 1-3, Garvin Spring 2016人のメンバー

OSU-GARVIN-S16S1G3

4 メンバー

4のガイドは作成済み

0 件のコメント

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 244