メインコンテンツにスキップ

Samsung Rogue Speaker/Antenna Replacement

必要な工具と部品

  1. Samsung Rogue Speaker/Antenna Replacement, Battery: 手順 1、 2の画像 1 Samsung Rogue Speaker/Antenna Replacement, Battery: 手順 1、 2の画像 2
    • Before disassembling your Samsung Rogue, make sure it is powered off.

    • With your thumbs, push down on the back cover of your phone and slide it away from the camera.

  2. Samsung Rogue Speaker/Antenna Replacement: 手順 2、 2の画像 1 Samsung Rogue Speaker/Antenna Replacement: 手順 2、 2の画像 2
    • You can now remove the battery by prying it up with your finger.

  3. Samsung Rogue Speaker/Antenna Replacement, Motherboard: 手順 3、 1の画像 1
    • Use a plastic opening tool to carefully pry the back cover surrounding the camera up from the phone.

  4. Samsung Rogue Speaker/Antenna Replacement: 手順 4、 1の画像 1
    • Remove the five 3.4mm Philips screws securing the backing of the phone.

  5. Samsung Rogue Speaker/Antenna Replacement: 手順 5、 3の画像 1 Samsung Rogue Speaker/Antenna Replacement: 手順 5、 3の画像 2 Samsung Rogue Speaker/Antenna Replacement: 手順 5、 3の画像 3
    • Use a plastic opening tool to carefully pry off the back cover.

    • Make sure you are prying along the edge and not between the two halves of the phone that slide away from each other.

    • Be careful to not drop the volume changing piece, for it can easily slip out.

  6. Samsung Rogue Speaker/Antenna Replacement: 手順 6、 1の画像 1
    • Remove the two 3.45 mm Philips screws below the white sticker.

  7. Samsung Rogue Speaker/Antenna Replacement: 手順 7、 2の画像 1 Samsung Rogue Speaker/Antenna Replacement: 手順 7、 2の画像 2
    • Carefully lift the motherboard up from the bottom edge.

    • The film of wires is still attached to the motherboard, so do not completely remove the motherboard just yet or you may damage it.

  8. Samsung Rogue Speaker/Antenna Replacement: 手順 8、 2の画像 1 Samsung Rogue Speaker/Antenna Replacement: 手順 8、 2の画像 2
    • Use a plastic opening tool to disconnect the film from the motherboard.

  9. Samsung Rogue Speaker/Antenna Replacement, Speaker/Antenna: 手順 9、 1の画像 1
    • On the underside of the motherboard, remove the single 3.3mm Philips screw.

  10. Samsung Rogue Speaker/Antenna Replacement: 手順 10、 3の画像 1 Samsung Rogue Speaker/Antenna Replacement: 手順 10、 3の画像 2 Samsung Rogue Speaker/Antenna Replacement: 手順 10、 3の画像 3
    • The speaker and the antenna are both connected on the same black piece.

    • Use a plastic opening tool to pop off the edges of the speaker/antenna piece from the motherboard.

    • Turn over the motherboard and carefully lift the speaker/antenna piece straight up.

    • The camera is held in the middle of the speaker/antenna piece. Make sure to lift directly up when lifting the speaker/antenna piece, otherwise you can risk damaging the camera.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

5人の作成者と共同で作成されました。

Viktoria Mikoultchik

メンバー登録日: 04/15/12

25 ポイント

7のガイドは作成済み

チーム

Cal Poly, Team 7-32, Maness Spring 2012 Cal Poly, Team 7-32, Maness Spring 2012人のメンバー

CPSU-MANESS-S12S7G32

4 メンバー

16のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 1

今までの合計 355