メインコンテンツにスキップ

Samsung NP-130-JA01US RAM Replacement

必要な工具と部品

  1. Samsung NP-130-JA01US RAM Replacement, Battery: 手順 1、 1の画像 1
    • Turn off the computer.

    • Disconnect the charger cable from the computer.

    • Failure to disconnect the charger cable from the computer could result in an electric shock.

    • Flip the computer over so the underside is facing up.

  2. Samsung NP-130-JA01US RAM Replacement: 手順 2、 2の画像 1 Samsung NP-130-JA01US RAM Replacement: 手順 2、 2の画像 2
    • Slide the left and right slider buttons fully away from each other.

  3. Samsung NP-130-JA01US RAM Replacement: 手順 3、 1の画像 1
    • Pull the battery out of the computer.

  4. Samsung NP-130-JA01US RAM Replacement, RAM: 手順 4、 2の画像 1 Samsung NP-130-JA01US RAM Replacement, RAM: 手順 4、 2の画像 2
    • Locate the "Memory" panel on the bottom right corner.

    • Use the Phillips 01 screwdriver to remove the screw.

    • The screw is a Phillips 1 (PH 1) with a length of 60 millimeters (mm)

  5. Samsung NP-130-JA01US RAM Replacement: 手順 5、 1の画像 1
    • With your hand, lift panel and remove it.

  6. Samsung NP-130-JA01US RAM Replacement: 手順 6、 2の画像 1 Samsung NP-130-JA01US RAM Replacement: 手順 6、 2の画像 2
    • Slide metal prongs (marked in red squares) away from each other with your fingers.

    • The RAM chip will automatically lift up at an angle for easy ejection.

  7. Samsung NP-130-JA01US RAM Replacement: 手順 7、 1の画像 1
    • With your hands, carefully slide the RAM chip out to remove.

    • The RAM chip is delicate, do not force it when removing it.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

2人の作成者と共同で作成されました。

Jason Schnebelen

メンバー登録日: 09/18/16

267 ポイント

2のガイドは作成済み

チーム

USF Tampa, Team 9-6, Lacy Fall 2016 USF Tampa, Team 9-6, Lacy Fall 2016人のメンバー

USFT-LACY-F16S9G6

3 メンバー

5のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 3

今までの合計 197