メインコンテンツにスキップ

パーツ

パーツは指定されていません。

  1. Power off laptop before starting.
    • Power off laptop before starting.

    • Find the back plate cover labeled HDD.

  2. Remove both of the 5 mm Phillips head screws on the HDD back plate cover. Remove both of the 5 mm Phillips head screws on the HDD back plate cover.
    • Remove both of the 5 mm Phillips head screws on the HDD back plate cover.

  3. Pull down while applying pressure to release HDD back plate cover and then lift the cover upward. Pull down while applying pressure to release HDD back plate cover and then lift the cover upward. Pull down while applying pressure to release HDD back plate cover and then lift the cover upward.
    • Pull down while applying pressure to release HDD back plate cover and then lift the cover upward.

  4. Find the black plastic tab on the hard drive.
    • Find the black plastic tab on the hard drive.

  5. Grasp the tab and pull it to the left until the hard drive releases its connection and is able to be lifted free. Grasp the tab and pull it to the left until the hard drive releases its connection and is able to be lifted free.
    • Grasp the tab and pull it to the left until the hard drive releases its connection and is able to be lifted free.

終わりに

To reassemble your device, follow these instructions in reverse order.

3 の人々がこのガイドを完成させました。

Brian Adamson

メンバー登録日: 2016年10月10日

529 ポイント

3のガイドは作成済み

チーム

Texas Tech, Team 6-2, Bennett Fall 2016 Texas Tech, Team 6-2, Bennett Fall 2016人のメンバー

TTU-BENNETT-F16S6G2

4 メンバー

3のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 2

過去 30 日: 15

今までの合計 1,251