メインコンテンツにスキップ

パーツ

パーツは指定されていません。

  1. Remove batteries before you disassemble the remote Use a case opening tool to gently split the upper and lower case Work around the entire case until the 2 halves come apart completely
    • Remove batteries before you disassemble the remote

    • Use a case opening tool to gently split the upper and lower case

    • Work around the entire case until the 2 halves come apart completely

  2. Release the circuit board by gently pushing the plastic tab away from the board Use minimal force to avoid breaking it
    • Release the circuit board by gently pushing the plastic tab away from the board

    • Use minimal force to avoid breaking it

    • Lift circuit board off top cover to expose the rubber button membrane

    • Lift off the rubber button membrane

  3. Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now

    Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now
  4. During reassembly make sure that you correctly place the battery cover retainer on the read case During reassembly make sure that you correctly place the battery cover retainer on the read case
    • During reassembly make sure that you correctly place the battery cover retainer on the read case

  5. When placing rear cover back onto the assembled top cover make sure you correctly align the battery terminals with the slots in the cover When placing rear cover back onto the assembled top cover make sure you correctly align the battery terminals with the slots in the cover
    • When placing rear cover back onto the assembled top cover make sure you correctly align the battery terminals with the slots in the cover

まとめ

To reassemble your device, follow these instructions in reverse order.

9 の人々がこのガイドを完成させました。

Richdave

メンバー登録日: 2010年04月09日

29,568 ポイント

30のガイドは作成済み

チーム

Master Techs Master Techs人のメンバー

Community

287 メンバー

819のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 7

過去 7 日: 37

過去 30 日: 165

今までの合計 24,799