はじめに

Use this guide to install a rear case.

Slide the battery cover downwards with pressure focused on the center of the cover.
  • Slide the battery cover downwards with pressure focused on the center of the cover.

  • Lift the cover off of the phone.

コメントを追加する

Grasp the bottom left and right corners of the battery and lift it from its housing.
  • Grasp the bottom left and right corners of the battery and lift it from its housing.

コメントを追加する

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Remove the four black 7.30 mm screws surrounding the battery housing using a Phillips #00 Screwdriver.
  • Remove the four black 7.30 mm screws surrounding the battery housing using a Phillips #00 Screwdriver.

コメントを追加する

The rear case is firmly attached to the phone with clips. Do not be afraid to use a little extra force. Insert the Plastic Opening Tool in between the front and rear cases. Pry with the Plastic Opening Tool around all edges of the phone until you free all the clips.
  • The rear case is firmly attached to the phone with clips. Do not be afraid to use a little extra force.

  • Insert the Plastic Opening Tool in between the front and rear cases.

  • Pry with the Plastic Opening Tool around all edges of the phone until you free all the clips.

コメントを追加する

Lift the rear case off of the phone.
  • Lift the rear case off of the phone.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Paul Piller

メンバー登録日: 2011年04月12日

56 ポイント

5のガイドは作成済み

チーム

Cal Poly, Team 24-57, Amido Spring 2011 Cal Poly, Team 24-57, Amido Spring 2011人のメンバー

CPSU-AMIDO-S11S24G57

4 メンバー

7のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 1,058