Skip to main content

はじめに

If sound from your speaker is muffles or not working at all, use this guide to replace it.

  1. Place the watch screen-down so that its back cover is showing.
    • Place the watch screen-down so that its back cover is showing.

  2. Remove the four 4.2mm screws with a Y00 screwdriver. Remove the four 4.2mm screws with a Y00 screwdriver.
    • Remove the four 4.2mm screws with a Y00 screwdriver.

  3. Wedge the metal spudger in between the back cover and the frame along the seam. Use force to pry the back cover away from the main watch frame. This step requires a lot of force. You can use a Jimmy in place of a metal spudger to make the process easier.
    • Wedge the metal spudger in between the back cover and the frame along the seam.

    • Use force to pry the back cover away from the main watch frame.

    • This step requires a lot of force. You can use a Jimmy in place of a metal spudger to make the process easier.

    • This step will ruin the water-proof seal.

  4. Detach the three connectors on the motherboard using your fingernail. The connectors are easy to pop off. Minimal force is necessary. The connectors are easy to pop off. Minimal force is necessary.
    • Detach the three connectors on the motherboard using your fingernail.

    • The connectors are easy to pop off. Minimal force is necessary.

  5. MacBook Battery 修理キット

    最低価格 $69.99

    Buy Now

    MacBook Battery 修理キット

    最低価格 $69.99

    Buy Now
  6. Separate the motherboard and front screen assembly using a spudger. Separate the motherboard and front screen assembly using a spudger. Separate the motherboard and front screen assembly using a spudger.
    • Separate the motherboard and front screen assembly using a spudger.

  7. Using a JIS #00 screwdriver, remove the two 4.5 mm screws. Using a JIS #00 screwdriver, remove the two 4.5 mm screws.
    • Using a JIS #00 screwdriver, remove the two 4.5 mm screws.

  8. Disconnect the battery ribbon cable from bracket. Separate the chassis from the motherboard. Be careful with the battery ribbon cable, as it is very easy to break (ours did when disassembling).
    • Disconnect the battery ribbon cable from bracket.

    • Separate the chassis from the motherboard.

    • Be careful with the battery ribbon cable, as it is very easy to break (ours did when disassembling).

    • Note how the end of the ribbon cable seats in the plastic chassis. Look for the plastic pin on the chassis when re-seating.

  9. Separate the battery from the motherboard. The battery and the motherboard are secured with adhesive; some force is needed.
    • Separate the battery from the motherboard.

    • The battery and the motherboard are secured with adhesive; some force is needed.

    • Lithium-ion batteries are potentially dangerous. Handle with extreme care and do not puncture the battery.

  10. Remove the battery's cable from the chassis using tweezers. Remove the battery's cable from the chassis using tweezers. Remove the battery's cable from the chassis using tweezers.
    • Remove the battery's cable from the chassis using tweezers.

  11. Remove the single 3.9mm screw with a JIS #000 screwdriver. Remove the single 3.9mm screw with a JIS #000 screwdriver.
    • Remove the single 3.9mm screw with a JIS #000 screwdriver.

  12. Separate the two parts of the chassis. The speaker is located on the bulkier  half of the chassis (see third image). The speaker is located on the bulkier  half of the chassis (see third image).
    • Separate the two parts of the chassis.

    • The speaker is located on the bulkier half of the chassis (see third image).

  13. Remove the connection from the chassis with tweezers. Attempting to remove the connection by grabbing the speaker itself may result in damage to the speaker and it's connection.
    • Remove the connection from the chassis with tweezers.

    • Attempting to remove the connection by grabbing the speaker itself may result in damage to the speaker and it's connection.

    • Separate the speaker from the chassis.

まとめ

To reassemble your device, follow these instructions in reverse order.

Jimmy Algeo

メンバー登録日: 2018年10月08日

258 ポイント

2のガイドは作成済み

チーム

Cal Poly, Team S15-G2, White Fall 2018 Cal Poly, Team S15-G2, White Fall 2018人のメンバー

CPSU-WHITE-F18S15G2

4 メンバー

14のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 4

過去 7 日: 47

過去 30 日: 157

今までの合計 636