Samsung Gear 360 Rear Camera Replacement

はじめに

This guide will show you how to remove the rear camera module from the Samsung Gear 360. Like the front camera, this module can be removed by completing a tear-down of the device, and unscrewing the module from there.

必要な工具と部品

手順1 Case

Samsung Gear 360 Rear Camera Replacement, Case: 手順 1、 3の画像 1

Samsung Gear 360 Rear Camera Replacement, Case: 手順 1、 3の画像 2

Samsung Gear 360 Rear Camera Replacement, Case: 手順 1、 3の画像 3

Twist silver ring on the lens counter-clockwise with force to remove it.

編集

手順2

Insert a small flathead screwdriver into marked slot on camera lens and pry off camera lens cover.

編集

手順3

Using a PH00 screwdriver head, remove all Phillips #00 0.75 mm screws on the front of the camera.
Repeat for the back side of the camera.

編集

手順4

Samsung Gear 360 Rear Camera Replacement: 手順 4、 3の画像 3

Peel off the black rubber located on the bottom of the device using your hand or a small flathead screwdriver.

編集

手順5

Once the black rubber has been removed, unscrew all Phillips #00 0.75 mm screws on the bottom of the device using a PH00 screwdriver head.

編集

手順6

Using a plastic opening tool, pry the tripod mount off the device.

編集

手順7

Using both hands, carefully remove the right cover off the camera body.

編集

手順8

Samsung Gear 360 Rear Camera Replacement: 手順 8、 3の画像 3

To remove the left cover of the camera body, lift the left cover using a small flathead screwdriver and pull it off.

編集

手順9

Once the camera body has been removed, lift and pull off the metal support ring using a small flathead screwdriver.
Repeat for both sides of the camera.

編集