メインコンテンツにスキップ

はじめに

Over time a speaker may become damaged and the audio sound quality may become poor. If this is to occur, replacing the speaker can fix this issues. This guide will show you how to replace the headphone jack and speakers.

  1. Place the plastic opening tool between the face of the display and  rim of the back cover of the device. Move the plastic opening tool in a downward motion until you see separation between the tablet and back cover.
    • Place the plastic opening tool between the face of the display and rim of the back cover of the device.

    • Move the plastic opening tool in a downward motion until you see separation between the tablet and back cover.

  2. By sliding the plastic opening tool around the rim of the device, carefully continue to pry apart the screen and back cover.
    • By sliding the plastic opening tool around the rim of the device, carefully continue to pry apart the screen and back cover.

    • Try to separate evenly on all sides until the screen detaches from the device backing completely.

    • If this is the first time removing the back cover, it will be rather difficult to separate it from the tablet.

  3. Remove the back cover after the entire rim is disconnected.
    • Remove the back cover after the entire rim is disconnected.

  4. Remove the two 2 mm Phillips #000 securing the headphone jack. Remove the two 2 mm Phillips #000 securing the headphone jack.
    • Remove the two 2 mm Phillips #000 securing the headphone jack.

  5. Disconnect the blue connector by gently popping it off of the motherboard with a plastic opening tool.
    • Disconnect the blue connector by gently popping it off of the motherboard with a plastic opening tool.

  6. Use the metal spudger to pry from the top left corner of the headphone jack/lower speaker assembly. Gently lift the headphone jack/lower speaker assembly free of the device.
    • Use the metal spudger to pry from the top left corner of the headphone jack/lower speaker assembly.

    • Gently lift the headphone jack/lower speaker assembly free of the device.

  7. Locate the top speaker.
    • Locate the top speaker.

    • Use a plastic opening tool to disconnect the green-gold upper speaker connector from the motherboard.

  8. Use a spudger to pry the uper speaker up and away from the device. Use a spudger to pry the uper speaker up and away from the device.
    • Use a spudger to pry the uper speaker up and away from the device.

終わりに

To reassemble your device, follow these instructions in reverse order.

8 の人々がこのガイドを完成させました。

Trent Chapman

メンバー登録日: 2015年10月01日

1,333 ポイント

3のガイドは作成済み

チーム

Cal Poly, Team 12-15, Maness Fall 2015 Cal Poly, Team 12-15, Maness Fall 2015人のメンバー

CPSU-MANESS-F15S12G15

4 メンバー

12のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 1

過去 7 日: 3

過去 30 日: 10

今までの合計 2,973