メインコンテンツにスキップ

はじめに

This guide will show you how to take off the back panel of the device and take out and replace the battery.

  1. Begin by separating the back panel from the screen glass assembly using the plastic opening tool.
    • Begin by separating the back panel from the screen glass assembly using the plastic opening tool.

    • Insert the plastic opening tool between the edge of the glass screen and the metal frame around the device.

  2. Continue around the entire device until the back panel is completely separated from the screen. Continue around the entire device until the back panel is completely separated from the screen.
    • Continue around the entire device until the back panel is completely separated from the screen.

  3. Remove the four 2.5mm Phillips #000 screws. Remove the four 2.5mm Phillips #000 screws.
    • Remove the four 2.5mm Phillips #000 screws.

  4. Gently pull up on the plastic tab that has red, blue and black wires that connects the battery to the motherboard.
    • Gently pull up on the plastic tab that has red, blue and black wires that connects the battery to the motherboard.

  5. The battery should be completely disconnected and the new one can be installed.
    • The battery should be completely disconnected and the new one can be installed.

終わりに

To reassemble your device, follow these instructions in reverse order.

14 の人々がこのガイドを完成させました。

Jonathan Romine

メンバー登録日: 2016年09月12日

904 ポイント

2のガイドは作成済み

チーム

USF Tampa, Team 9-2, Lacy Fall 2016 USF Tampa, Team 9-2, Lacy Fall 2016人のメンバー

USFT-LACY-F16S9G2

4 メンバー

10のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 11

過去 7 日: 34

過去 30 日: 140

今までの合計 8,853