メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

はじめに

Prerequisite Only

パーツ

パーツは指定されていません。

  1. Remove the six 4 mm Phillips #00 screws that hold the battery in place. Remove the six 4 mm Phillips #00 screws that hold the battery in place.
    • Remove the six 4 mm Phillips #00 screws that hold the battery in place.

  2. The Essential Toolkit

    コンパクト版iFixitキットの中で最も利便性の高いツール

    ショップを見る

    The Essential Toolkit

    コンパクト版iFixitキットの中で最も利便性の高いツール

    ショップを見る
  3. Remove the tape that runs along the length of the battery. Lift the retaining flaps of the ZIF connectors on each side of the battery connector. Remove the two ribbon cables that lay across the width of the battery and are connected to the motherboard. Place your finger underneath the ribbon cable and gently lift the cable upwards and off.
    • Remove the tape that runs along the length of the battery.

    • Lift the retaining flaps of the ZIF connectors on each side of the battery connector.

    • Remove the two ribbon cables that lay across the width of the battery and are connected to the motherboard. Place your finger underneath the ribbon cable and gently lift the cable upwards and off.

  4. Use a plastic tweezer and remove the top center 6 pin power connector that is attached to the edge of the motherboard. Detach the battery by gently lifting the battery out of the panel.
    • Use a plastic tweezer and remove the top center 6 pin power connector that is attached to the edge of the motherboard.

    • Detach the battery by gently lifting the battery out of the panel.

終わりに

To reassemble your device, follow these instructions in reverse order.

Stephen Yeung

メンバー登録日: 2015年08月26日

1,367 ポイント

6のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 99