Samsung Galaxy Tab A 9.7 Rear Camera Replacement

はじめに

This replacement guide will help you easily follow the steps in order to replace the rear camera on a Samsung Galaxy Tab A 9.7. For clarification purposes, the rear camera is underneath the motherboard. The difficulty of this guide is moderate and requires special attention to details.

必要な工具と部品

手順1 Rear Camera

Samsung Galaxy Tab A 9.7 Rear Camera Replacement, Rear Camera: 手順 1、 1の画像 1

Pry along the edge of the Samsung Galaxy Tab A 9.7 with an iFixit opening tool.

編集

手順2

Insert a second iFixit opening tool along the edge and begin to pry open the back cover a little with each one.

編集

手順3

Remove one of the iFixit opening tools and begin to go around the device with the other one until the back cover pops off.

編集

手順4

Remove five 2.8 mm screws using the Phillips #000 screwdriver.

編集

手順5

Disconnect all wires and strips that connect the motherboard to any other part of the device with an iFixit opening tool.
Lift up gently on all wires and strips.

編集

手順6

Lift the motherboard out of the back panel using an iFixit opening tool.
Be gentle when wiggling the motherboard out from underneath the battery's protective edge.

編集