メインコンテンツにスキップ

はじめに

To replace other parts inside your Samsung Galaxy Tab A 10.1, you must first open up the device through the back. This guide will show you how to remove the back panel of the device.

  1. Have the front of the device facing you. Begin near one of the curved edges of the device (see photo two for visual example).
    • Have the front of the device facing you.

    • Begin near one of the curved edges of the device (see photo two for visual example).

    • Place a plastic opening tool between the front and back panels.

    • If a plastic opening tool doesn’t work, using a metal spudger may work, but it may damage the plastic on the device.

    • Remember to remove the micro SD card (if present) before you begin.

  2. Once the plastic opening tool is fully inserted, wedge it around the device’s edges to separate the panels. Lift the back panel off of the device.
    • Once the plastic opening tool is fully inserted, wedge it around the device’s edges to separate the panels.

    • Lift the back panel off of the device.

    • The back panel will make a clicking noise while being lifted off of the device.

終わりに

To reassemble your device, follow these instructions in reverse order.

8 の人々がこのガイドを完成させました。

Isabella Li

メンバー登録日: 2017年10月02日

2,121 ポイント

7のガイドは作成済み

チーム

Cal Poly, Team S15-G6, Livingston Fall 2017 Cal Poly, Team S15-G6, Livingston Fall 2017人のメンバー

CPSU-LIVINGSTON-F17S15G6

4 メンバー

26のガイドは作成済み

コメント1件

Why need to remove cables when only the back has to be replaced ?

nabe_03 - 返信

コメントを追加

統計データを表示:

過去 24時間: 3

過去 7 日: 27

過去 30 日: 111

今までの合計 8,699