Samsung Galaxy SIII Mini Display Assembly Replacement

はじめに

If the touch screen / digitizer / glass or the LCD display is broken, this manual will show you, how to disassemble the phone and replace the Display Assembly without frame.

[text|align=center]

_______________________________________ Video tutorial _______________________________________

必要な工具と部品

ビデオの概要

手順1 Display Assembly

Samsung Galaxy SIII Mini Display Assembly Replacement, Display Assembly: 手順 1、 2の画像 1

Samsung Galaxy SIII Mini Display Assembly Replacement, Display Assembly: 手順 1、 2の画像 2

LCD Display + Touch screen (Display Assemblay) for Samsung Galaxy S III mini / i8190.
Switch off the phone, remove the battery and any SIM and memory card.

翻訳

手順2

Samsung Galaxy SIII Mini Display Assembly Replacement: 手順 2、 3の画像 3

Remove 10x Phillips screws.
With a plastic tool remove the Middle frame.

翻訳

手順3

Samsung Galaxy SIII Mini Display Assembly Replacement: 手順 3、 3の画像 3

Disconnect:
Menu buttons flex cable
Micro SD Card reader flex cable
Lift up slightly the mother board from the right edge.
Unstick the Earpiece and Main camera from the display frame. Be careful, don't break flex cables.
Now disconnect the LCD Display flex cable which is located on the underside of the board.

翻訳

手順4

Front camera
Main / Rear camera
Earpiece
Loudspeaker
Vibro motor
Micro SD Card reader

翻訳

手順5

Samsung Galaxy SIII Mini Display Assembly Replacement: 手順 5、 3の画像 3

Let's test the new spare part.
First connect the Display assembly, grab the phone comfortably and then put the battery.

翻訳

手順6

Samsung Galaxy SIII Mini Display Assembly Replacement: 手順 6、 3の画像 3

Warm the touchscreen to make adhesive tape soft. You can use a hair dryer.
If the glass is cracked, put the tape in order not to scatter pieces.
Use the front camera hole to separate the glass at the corner.
Continue with separation with plastic tools, from up to down.

翻訳

手順7

Samsung Galaxy SIII Mini Display Assembly Replacement: 手順 7、 3の画像 3

Gently separate the menu buttons flex cable from the touchscreen.

翻訳

手順8

Samsung Galaxy SIII Mini Display Assembly Replacement: 手順 8、 3の画像 3

If the display is left on the frame, use the same techniques to remove it.

翻訳

手順9

Samsung Galaxy SIII Mini Display Assembly Replacement: 手順 9、 3の画像 3

Clean the frame from the remnants of tape and install new.
Be careful with the menu buttons and the holes for the camera and the light sensor, don't cover them.

翻訳