Samsung Galaxy On5 Speaker Replacement

この修理ガイドは変更されています。最新の未承認バージョンに切り替えます。

はじめに

The Samsung Galaxy On5 speaker is located in the back of the phone. Now getting to isn't difficult to get to, but once you're in the phone chaise everything is smooth sailing.

必要な工具と部品

手順1 Battery

Samsung Galaxy On5 Speaker Replacement, Battery: 手順 1、 1の画像 1

Locate the side notch that allows you to open the back casing.

翻訳

手順2

Samsung Galaxy On5 Speaker Replacement: 手順 2、 3の画像 3

Use a plastic prying tool or your fingernail to pop the back cover off of the phone.

翻訳

手順3

Samsung Galaxy On5 Speaker Replacement: 手順 3、 3の画像 3

Locate the battery notch and remove the battery, using either your finger or a plastic prying tool.
Be careful not to puncture the battery. Lithium-ion batteries are highly flammable when exposed to oxygen.

翻訳

手順4 Speaker

Samsung Galaxy On5 Speaker Replacement, Speaker: 手順 4、 2の画像 1

Samsung Galaxy On5 Speaker Replacement, Speaker: 手順 4、 2の画像 2

Before dissembling the phone take out the SIM card and microSD card.
Use a plastic pry tool to slide both cards out.
Do not use a metal pry tool. Use of one can cause damage to the cards or the pins with the cards holder.

翻訳

手順5

Samsung Galaxy On5 Speaker Replacement: 手順 5、 3の画像 3

Take the plastic Spudger tool to pry open the LCD ribbon cable cover.
This part might be a little hard to open. Take your time and be careful not to push too hard, so there's no damage to the ribbon cable
Once the cover is remove, place the cover aside so its not miss placed

翻訳

手順6

Samsung Galaxy On5 Speaker Replacement: 手順 6、 3の画像 3

Take a plastic pry tool and work towards the top right of the LCD ribbon cable to pry the cable from the logic board.
Do not use a metal pry tool. Metal pry tools can cause damage to the logic board and to the ribbon cable.
This cable send signal from the logic board to the LCD screen.
Once unplugged move the cable aside.

翻訳

手順7

Take a PH00 Philip head and remove all 9 screws. Once done place them aside where you won't lose them.
All 9 screws are the same size.

翻訳

手順8

Use iFixit plastic picks to pry away the LCD from the bask assembly.
This process will take a bit due to the glue thats holding the LCD and back assembly together. Slowly move around the edge go the screen to loosen the glue up.
If you have a heat gun, you can use the heat gun heat up the glue. That will make the use of the plastic picks easy to pry the pieces apart.

翻訳

手順9

Samsung Galaxy On5 Speaker Replacement: 手順 9、 3の画像 3

Once both the LCD and back assemble come apart, look at the back assembly which the speaker is located.
Once located take a the plastic pry tool to remove the speaker of its housing. And replace it with a new one.

翻訳