メインコンテンツにスキップ
  1. この手順は未翻訳です。 翻訳を手伝う。

    • Using the nylon spudger or plastic opening tool along the edges of the screen, separate the back case off of the device.

    • If possible, consider using the black nylon spudger for a gentler separation.

  2. この手順は未翻訳です。 翻訳を手伝う。

    Remove the three 3mm screws on the top right side of the device with the Phillips PH000 screw head. Remove the one 3mm screw on the top left side of the device with the same method.
    • Remove the three 3mm screws on the top right side of the device with the Phillips PH000 screw head.

    • Remove the one 3mm screw on the top left side of the device with the same method.

  3. この手順は未翻訳です。 翻訳を手伝う。

    Remove the gray rubber piece. Use a spudger or fingernail to disconnect the blue antenna cable from the motherboard. Remove the right speaker unit.
    • Remove the gray rubber piece.

    • Use a spudger or fingernail to disconnect the blue antenna cable from the motherboard.

    • Remove the right speaker unit.

  4. この手順は未翻訳です。 翻訳を手伝う。

    Remove the loudspeaker modules located on the parts where the screws were removed by using the black nylon spudger. They are the black pieces at the top left and right corners of the device that have metal squares on them in the middle. They are the black pieces at the top left and right corners of the device that have metal squares on them in the middle.
    • Remove the loudspeaker modules located on the parts where the screws were removed by using the black nylon spudger.

    • They are the black pieces at the top left and right corners of the device that have metal squares on them in the middle.

ゴール

4 の人々がこのガイドを完成させました。

Joseph Rasico

メンバー登録日: 2017年02月20日

2,025 ポイント

6のガイドは作成済み

チーム

USF Tampa, Team S1-G6, Leahy Spring 2017 USF Tampa, Team S1-G6, Leahy Spring 2017人のメンバー

USFT-LEAHY-S17S1G6

3 メンバー

6のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 6

今までの合計 1,349