Samsung Galaxy J3 Prime Battery and SIM Card Replacement

はじめに

Use this guide to replace the battery and SIM card on your Samsung Galaxy J3 Prime smartphone. The battery of any smartphone is very critical. It depletes with time, preventing your phone to work at its full potential. The worn-out battery can cause your phone to run out of power within minutes even though you have charged it to 100%.

A battery is meant to give power to your phone. But, over time, charging your battery reduces its performance. We are consistently charging our phones batteries, which isn’t ideal in the long run.

This guide is simple to follow as you will not need any screwdrivers or tools, as your hand gets the job done.

In step 1 of this guide, you will need to power off your phone completely. Also, make sure to remove any external devices plugged in and avoid the presence of water.

手順1 Battery and SIM card

Samsung Galaxy J3 Prime Battery and SIM Card Replacement, Battery and SIM card: 手順 1、 1の画像 1

Power off your phone by holding down the power button; located on the top right-hand side of your phone for approximately 5 seconds.
Make sure to remove your phone charger if it is plugged in.

編集

手順2

Samsung Galaxy J3 Prime Battery and SIM Card Replacement: 手順 2、 3の画像 3

Turn your phone so the back is facing up.
Using your fingers or a spudger, remove the cover by lifting it from the slot located on the top right-hand side underneath the volume buttons.

編集

手順3

Remove the battery by lifting it up from the slot in the bottom right corner.

編集

手順4

Samsung Galaxy J3 Prime Battery and SIM Card Replacement: 手順 4、 3の画像 3

Slide the SIM card down from the SIM card slot.
Make sure to firmly press down on the SIM card when sliding down, for easy removal.

編集

手順5

Slide the new SIM card into the slot.
When you slide the new SIM card in, make sure to place the golden pleated side face down.
Now place the new battery into the battery slot by aligning it correctly with the four gold contacts.