メインコンテンツにスキップ

パーツ

パーツは指定されていません。

  1. Insert a finger nail or plastic opening tool between the back cover and the device.
    • Insert a finger nail or plastic opening tool between the back cover and the device.

    • Gently pry the rear cover off of the back of the phone.

  2. Using a finger, pull the SIM card down out of its slot. Remove the SIM card.
    • Using a finger, pull the SIM card down out of its slot.

    • Remove the SIM card.

    • The pictured device is missing the SIM card and battery.

  3. Using a Phillips #00 screwdriver remove the eleven 3 mm screws.
    • Using a Phillips #00 screwdriver remove the eleven 3 mm screws.

  4. MacBook Battery 修理キット

    最低価格 $69.99

    Buy Now

    MacBook Battery 修理キット

    最低価格 $69.99

    Buy Now
  5. Insert a plastic opening tool between the screen and the back of the device. Starting at the bottom of the device, gently slide the tool along the edges of the screen. Gently pry the main assembly from the midframe of the device.
    • Insert a plastic opening tool between the screen and the back of the device.

    • Starting at the bottom of the device, gently slide the tool along the edges of the screen.

    • Gently pry the main assembly from the midframe of the device.

    • When removing the main assembly, pry gently so as to not crack the glass screen or break any clips within the device.

  6. Using the flat end of a spudger, disconnect the digitizer cable connector. Using the flat end of a spudger, disconnect the digitizer cable connector.
    • Using the flat end of a spudger, disconnect the digitizer cable connector.

  7. Using a plastic opening tool pry between silver digitizer and black back piece. Slowly slide plastic opening tool around the screen to loosen the adhesive.
    • Using a plastic opening tool pry between silver digitizer and black back piece.

    • Slowly slide plastic opening tool around the screen to loosen the adhesive.

    • Be careful not to tear the digitizer cable when threading it through the plastic housing.

  8. Carefully separate display assembly from the plastic housing.
    • Carefully separate display assembly from the plastic housing.

まとめ

To reassemble your device, follow these instructions in reverse order.

9 の人々がこのガイドを完成させました。

Sean Kramer

メンバー登録日: 2018年02月14日

1,113 ポイント

6のガイドは作成済み

チーム

USF Tampa, Team S5-G4, Eyestone Spring 2018 USF Tampa, Team S5-G4, Eyestone Spring 2018人のメンバー

USFT-EYESTONE-S18S5G4

3 メンバー

6のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 2

過去 7 日: 18

過去 30 日: 90

今までの合計 1,888