メインコンテンツにスキップ

はじめに

You will be learning how to replace the motherboard.

パーツ

パーツは指定されていません。

  1. Locate the small indent in the top of the device and use your nails or a spudger to separate the cover from the mid-frame. Locate the small indent in the top of the device and use your nails or a spudger to separate the cover from the mid-frame.
    • Locate the small indent in the top of the device and use your nails or a spudger to separate the cover from the mid-frame.

  2. Locate the indent on the bottom left corner of the battery compartment. Use your fingers or the plastic opening tool to lift the battery from the device. Locate the indent on the bottom left corner of the battery compartment. Use your fingers or the plastic opening tool to lift the battery from the device.
    • Locate the indent on the bottom left corner of the battery compartment. Use your fingers or the plastic opening tool to lift the battery from the device.

  3. Remove the five 3mm screws along the top and bottom edges of the device with the Philips #00 screwdriver. One of these will be hidden under a piece of reflective foil. Breaking this will void the warranty. Use the plastic removal tool to work pry the mid-frame from the device.
    • Remove the five 3mm screws along the top and bottom edges of the device with the Philips #00 screwdriver.

    • One of these will be hidden under a piece of reflective foil. Breaking this will void the warranty.

    • Use the plastic removal tool to work pry the mid-frame from the device.

    • This may take some effort, so try working around the edges slowly as to not break anything.

  4. Locate the two ribbon cable connections on the motherboard. GENTLY use the pointed end of the spudger to disconnect the cables. Lift the motherboard out of the phone. Locate the two ribbon cable connections on the motherboard. GENTLY use the pointed end of the spudger to disconnect the cables. Lift the motherboard out of the phone. Locate the two ribbon cable connections on the motherboard. GENTLY use the pointed end of the spudger to disconnect the cables. Lift the motherboard out of the phone.
    • Locate the two ribbon cable connections on the motherboard. GENTLY use the pointed end of the spudger to disconnect the cables. Lift the motherboard out of the phone.

  5. Using your fingers or a plastic opening tool, carefully lift the motherboard assembly from the phone.
    • Using your fingers or a plastic opening tool, carefully lift the motherboard assembly from the phone.

  6. On the front face of the motherboard, locate the two #00 Phillips head screws. These hold the SIM card chassis in place. Keep these screws separate from the back plate screws.
    • On the front face of the motherboard, locate the two #00 Phillips head screws. These hold the SIM card chassis in place.

    • Keep these screws separate from the back plate screws.

終わりに

To reassemble your device, follow these instructions in reverse order.

5 の人々がこのガイドを完成させました。

Taylor

メンバー登録日: 2015年01月30日

1,165 ポイント

5のガイドは作成済み

チーム

USF Tampa, Team 16-6, Watkins Winter 2015 USF Tampa, Team 16-6, Watkins Winter 2015人のメンバー

USFT-WATKINS-W15S16G6

2 メンバー

5のガイドは作成済み

コメント1件

How to jumper network problem

Kshitiz khadka - 返信

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 3

今までの合計 1,060