メインコンテンツにスキップ

はじめに

Hello everyone! Today I am going to show you how to replace a battery in the Samsung Keystone 2. It’s very simple if you make sure to follow the directions carefully, so let’s get started!

  1. For an easier experience, use an opening tool to remove the back. Simply push the opening tool into the indent in the bottom and work you way around a little so you can pop it off. For an easier experience, use an opening tool to remove the back. Simply push the opening tool into the indent in the bottom and work you way around a little so you can pop it off.
    • For an easier experience, use an opening tool to remove the back. Simply push the opening tool into the indent in the bottom and work you way around a little so you can pop it off.

  2. Remove the battery by pulling it out, replace it with a new one, and put the cover back on. Remove the battery by pulling it out, replace it with a new one, and put the cover back on. Remove the battery by pulling it out, replace it with a new one, and put the cover back on.
    • Remove the battery by pulling it out, replace it with a new one, and put the cover back on.

  3. That’s it! Thanks for following this simple guide! Bye!
    • That’s it! Thanks for following this simple guide! Bye!

終わりに

To reassemble your device, follow these instructions in reverse order.

electrickid620

メンバー登録日: 2021年02月21日

817 ポイント

4のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 13