はじめに

You will need to find a clean area to work in and have the necessary tools. Follow this guide to gain access to your cellphone's input jack module.

パーツ

パーツは必要ありません。

    • Remove the back battery cover.

  1. Remove the phone's battery.
    • Remove the phone's battery.

  2. Remove six (4.28 x 1.25)mm screws.
    • Remove six (4.28 x 1.25)mm screws.

  3. Free shipping on all orders over $100.00 or containing a Pro Tech Toolkit!

    当社のショップを閲覧する

    Ever fixed something? That’s Genius.

    Share your repair story with #ImAGenius

    We Are All Geniuses

    Share your repair story with #ImAGenius

  4. Use the spudger to gently pry the silver plastic back plate from the body of the phone. Use the spudger to gently pry the silver plastic back plate from the body of the phone.
    • Use the spudger to gently pry the silver plastic back plate from the body of the phone.

  5. Peel off the Identification sticker
    • Peel off the Identification sticker

  6. Pop the red hinged-release lever away from its ribbon, then slide the ribbon out.
    • Pop the red hinged-release lever away from its ribbon, then slide the ribbon out.

  7. Pop the speaker plug out of its socket.
    • Pop the speaker plug out of its socket.

  8. Peel the button sensor off the top of the case.
    • Peel the button sensor off the top of the case.

  9. Peel the Input jack assembly out of the case.
    • Peel the Input jack assembly out of the case.

まとめ

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Sven

メンバー登録日: 2011年04月18日

40 ポイント

1ガイドが承認済み

チーム

Cal Poly, Team 15-11, Regan Spring 2011 Cal Poly, Team 15-11, Regan Spring 2011人のメンバー

CPSU-REGAN-S11S15G11

5 メンバー

14のガイドは作成済み

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 1,359