はじめに

Use this guide to replace the microSD card.

パーツ

パーツは必要ありません。

Insert a plastic opening tool, or your fingernail, into the opening near the left side of the headphone jack. Pry the opening tool downward to pop the rear case from its clips securing it to the the midframe.
  • Insert a plastic opening tool, or your fingernail, into the opening near the left side of the headphone jack.

  • Pry the opening tool downward to pop the rear case from its clips securing it to the the midframe.

コメントを追加する

Lift and remove the rear case. Lift and remove the rear case.
  • Lift and remove the rear case.

コメントを追加する

Use the flat end of a spudger, or your fingernail, to press the microSD card slightly deeper into its slot until you hear a click. After the click, release the card and it will pop out of its slot.
  • Use the flat end of a spudger, or your fingernail, to press the microSD card slightly deeper into its slot until you hear a click.

  • After the click, release the card and it will pop out of its slot.

  • During reassembly, push the microSD card into the slot until it clicks in place.

コメントを追加する

Pull the microSD card away from its slot.
  • Pull the microSD card away from its slot.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

3 の人々がこのガイドを完成させました。

Walter Galan

544,580 ポイント

2,798のガイドは作成済み

Uhh.... my Australian SGSII looks different to this...

Bonj - 返信

If you are having trouble addint a 64gb micro sd card, it's because you have to first format that card to FAT32. You have to do that to the memory card through a computer. Youtube too, it'll help

asff - 返信

コメントを追加する

統計データを表示:

過去 24時間: 1

過去 7 日: 1

過去 30 日: 7

今までの合計 4,091