はじめに

This guide will help you change the battery in your Chromebook. It requires you to take the Chromebook apart, since the battery is located inside.

Lay the Chromebook down so that the bottom cover is facing up. Remove the rubber feet on the four corners of the Chromebook in order to get to the screws underneath. They are stuck on with an adhesive. Remove the rubber feet on the four corners of the Chromebook in order to get to the screws underneath. They are stuck on with an adhesive.
  • Lay the Chromebook down so that the bottom cover is facing up.

  • Remove the rubber feet on the four corners of the Chromebook in order to get to the screws underneath. They are stuck on with an adhesive.

コメントを追加する

Remove the nine 4.7 mm screws on the bottom cover using a Phillips #00 screwdriver. Remove the nine 4.7 mm screws on the bottom cover using a Phillips #00 screwdriver. Remove the nine 4.7 mm screws on the bottom cover using a Phillips #00 screwdriver.
  • Remove the nine 4.7 mm screws on the bottom cover using a Phillips #00 screwdriver.

コメントを追加する

Pry up the plastic strip on the back of the Chromebook using a plastic opening tool. It is not necessary to remove it completely. It just needs to be separated from the bottom cover. It is not necessary to remove it completely. It just needs to be separated from the bottom cover.
  • Pry up the plastic strip on the back of the Chromebook using a plastic opening tool.

  • It is not necessary to remove it completely. It just needs to be separated from the bottom cover.

コメントを追加する

Pry off the bottom cover using a plastic opening tool. Pry off the bottom cover using a plastic opening tool. Pry off the bottom cover using a plastic opening tool.
  • Pry off the bottom cover using a plastic opening tool.

コメントを追加する

Remove six 3.5 mm screws holding the battery using a Phillips #00 screwdriver. Pull out the battery partway in order to easily get to the battery connector. Pull out the battery partway in order to easily get to the battery connector.
  • Remove six 3.5 mm screws holding the battery using a Phillips #00 screwdriver.

  • Pull out the battery partway in order to easily get to the battery connector.

コメントを追加する

Disconnect the battery connector by pulling straight up at its base. When reassembling, simply position the connector above it's original place, and push down. When reassembling, simply position the connector above it's original place, and push down.
  • Disconnect the battery connector by pulling straight up at its base.

  • When reassembling, simply position the connector above it's original place, and push down.

コメントを追加する

You can now remove the battery. You can now remove the battery.
  • You can now remove the battery.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

9 の人々がこのガイドを完成させました。

Andrey Radchishin

メンバー登録日: 2015年01月21日

1,128 ポイント

4のガイドは作成済み

チーム

UWT Liner: Group 1 UWT Liner: Group 1人のメンバー

Community

5 メンバー

4のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 1

過去 7 日: 29

過去 30 日: 118

今までの合計 2,402