メインコンテンツにスキップ

修理を始めるには

修理する権利

パーツ&ツール

はじめに

Follow these easy steps to replace the imaging unit in your Samsung CLP-300.

  1. Turn the printer off and wait a few minutes for it to cool.
    • Turn the printer off and wait a few minutes for it to cool.

  2. Open the front cover Open the front cover
    • Open the front cover

  3. Nintendo Switch 修理キット

    ゲームを再開するための、早くて簡単な修理キット

    Switch 修理キットページへ

    Nintendo Switch 修理キット

    ゲームを再開するための、早くて簡単な修理キット

    Switch 修理キットページへ
  4. Remove waste toner container from the printer.
    • Remove waste toner container from the printer.

  5. Pull the imaging unit out of the printer using bottom handle. Use green handle on top of imaging unit to steady unit as you pull it out. Holding the top and bottom handles on the new imaging unit, slide the unit in the printer until you hear a “click.”
    • Pull the imaging unit out of the printer using bottom handle.

    • Use green handle on top of imaging unit to steady unit as you pull it out.

    • Holding the top and bottom handles on the new imaging unit, slide the unit in the printer until you hear a “click.”

    • Remove new imaging unit from its packaging making sure to remove protective paper and devices from unit

    • Do not expose new imaging unit to light for more than a few minutes. Covering unit with a piece of paper is sufficient protection while you complete repair.

    • If you hear a crackling sound once the printer turns on the imaging unit is not installed correctly. Take out and reinsert the unit.

終わりに

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

Heather Howard

メンバー登録日: 2014年10月15日

586 ポイント

4のガイドは作成済み

チーム

University of Maine, Team 1-1, Diaz Fall 2014 University of Maine, Team 1-1, Diaz Fall 2014人のメンバー

UMAINE-DIAZ-F14S1G1

3 メンバー

4のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 3

過去 7 日: 9

過去 30 日: 61

今までの合計 11,667