メインコンテンツにスキップ

はじめに

Follow these steps to replace the fuser unit by taking off the back cover of your Samsung CLP-300.

  1. Turn the printer off and wait a few minutes for it to cool. Turn printer around so that you are looking at the rear panel.
    • Turn the printer off and wait a few minutes for it to cool.

    • Turn printer around so that you are looking at the rear panel.

  2. Open back of printer by pushing down handle.
    • Open back of printer by pushing down handle.

  3. MacBook Battery 修理キット

    最低価格 $69.99

    Buy Now

    MacBook Battery 修理キット

    最低価格 $69.99

    Buy Now
  4. Remove the four screws that attach the fuser unit to the printer. Remove the four screws that attach the fuser unit to the printer.
    • Remove the four screws that attach the fuser unit to the printer.

  5. Slide fuser unit out of the printer. Remove packaging from new fuser unit.
    • Slide fuser unit out of the printer.

    • Remove packaging from new fuser unit.

    • Insert new fuser unit.

まとめ

To reassemble your device, follow these instructions in reverse order.

Heather Howard

メンバー登録日: 2014年10月15日

466 ポイント

4のガイドは作成済み

チーム

University of Maine, Team 1-1, Diaz Fall 2014 University of Maine, Team 1-1, Diaz Fall 2014人のメンバー

UMAINE-DIAZ-F14S1G1

3 メンバー

4のガイドは作成済み

コメント1件

how do you unplug the old fuser unit and plug in the new fuser unit - you don’t show how to do that.

Dianne Martin - 返信

コメントを追加する

統計データを表示:

過去 24時間: 5

過去 7 日: 32

過去 30 日: 116

今までの合計 6,368