メインコンテンツにスキップ

はじめに

Use this guide to replace the motherboard of a Samsung Blast. This guide will take you through the process of how to successfully remove and replace the motherboard. A motherboard may need replacement if the device stops working.

パーツ

パーツは指定されていません。

  1. Remove the battery cover by pushing it upwards. Remove the battery cover by pushing it upwards.
    • Remove the battery cover by pushing it upwards.

  2. Take out the battery.
    • Take out the battery.

  3. With a Phillips #00 screwdriver, remove the six screws that secure the back of the case.
    • With a Phillips #00 screwdriver, remove the six screws that secure the back of the case.

    • You will not be able to completely remove the top two screws. Simply loosen them enough that you can still remove the cover.

  4. Pull off the back cover of the phone.
    • Pull off the back cover of the phone.

  5. Remove the volume and camera buttons by pulling them out. Put the buttons aside until it is time to reassemble the phone.
    • Remove the volume and camera buttons by pulling them out.

    • Put the buttons aside until it is time to reassemble the phone.

  6. Use the small plastic opening tool to  gently remove the motherboard from the rest of the phone.
    • Use the small plastic opening tool to gently remove the motherboard from the rest of the phone.

  7. Gently grab the motherboard with tweezers, then disconnect it from the two attached plates. Gently grab the motherboard with tweezers, then disconnect it from the two attached plates.
    • Gently grab the motherboard with tweezers, then disconnect it from the two attached plates.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

Paige Weinstein

メンバー登録日: 2014年02月11日

1 ポイント

1ガイドが承認済み

チーム

Ohio State, Team 1-5, Buehl Spring 2014 Ohio State, Team 1-5, Buehl Spring 2014人のメンバー

OSU-BUEHL-S14S1G5

4 メンバー

4のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 2

今までの合計 277