メインコンテンツにスキップ

Samsung Alias 2 Hinge Replacement

必要な工具と部品

  1. Samsung Alias 2 Hinge Replacement, Battery: 手順 1、 1の画像 1
    • Push down on the back cover of the phone, then remove the back cover.

  2. Samsung Alias 2 Hinge Replacement: 手順 2、 1の画像 1
    • Remove the battery.

  3. Samsung Alias 2 Hinge Replacement, Hinge: 手順 3、 1の画像 1
    • Use a Phillips #00 screwdriver to remove the two 4 mm screws on screen.

  4. Samsung Alias 2 Hinge Replacement: 手順 4、 2の画像 1 Samsung Alias 2 Hinge Replacement: 手順 4、 2の画像 2
    • Use the opening tool to remove the front outside casing.

  5. Samsung Alias 2 Hinge Replacement: 手順 5、 1の画像 1
    • Remove ribbon connector next to camera using tweezers.

  6. Samsung Alias 2 Hinge Replacement: 手順 6、 1の画像 1
    • Unscrew and remove the two 3.95 mm screws underneath that ribbon connector.

    • Be careful not to lose their accompanying plastic washers.

  7. Samsung Alias 2 Hinge Replacement: 手順 7、 2の画像 1 Samsung Alias 2 Hinge Replacement: 手順 7、 2の画像 2
    • Pull the two halves of the phone apart.

    • The phone will not slide straight apart. You have to angle the back half up a little.

    • Do not force it. Jiggle it a little if it doesn't come apart.

  8. Samsung Alias 2 Hinge Replacement: 手順 8、 1の画像 1
    • Remove the plastic panel cover from the hinge.

  9. Samsung Alias 2 Hinge Replacement: 手順 9、 2の画像 1 Samsung Alias 2 Hinge Replacement: 手順 9、 2の画像 2
    • Remove the 3.41 mm screw out from underneath plastic cover.

  10. Samsung Alias 2 Hinge Replacement: 手順 10、 2の画像 1 Samsung Alias 2 Hinge Replacement: 手順 10、 2の画像 2
    • Pop out the top half of the hinge with the plastic opening tool. This will release the hinge cover for removal.

  11. Samsung Alias 2 Hinge Replacement: 手順 11、 2の画像 1 Samsung Alias 2 Hinge Replacement: 手順 11、 2の画像 2
    • Pull off the hinge cover.

  12. Samsung Alias 2 Hinge Replacement: 手順 12、 2の画像 1 Samsung Alias 2 Hinge Replacement: 手順 12、 2の画像 2
    • Remove the two 2.71 mm screws on the hinge using screwdriver.

    • Under these screws will be a washer, spring, and small metal disc. Make sure you don't lose these.

  13. Samsung Alias 2 Hinge Replacement: 手順 13、 1の画像 1
    • Remove the Verizon logo from the back of phone using the plastic opening tool.

    • The logo is attached with glue. It will be sticky, but it just pulls off.

  14. Samsung Alias 2 Hinge Replacement: 手順 14、 1の画像 1
    • Remove the four 4.44 mm screws from the back.

    • Remove the three 4.35mm screws from under the Verizon logo.

    • Make sure you don't mix the screws together.

  15. Samsung Alias 2 Hinge Replacement: 手順 15、 1の画像 1
    • Pull the back off by using the plastic opening tool.

    • Do not lose the buttons on the side of the phone, as they will come off of the phone when you remove the back outside casing.

  16. Samsung Alias 2 Hinge Replacement: 手順 16、 1の画像 1
    • Pull up on the yellow tab.

  17. Samsung Alias 2 Hinge Replacement: 手順 17、 1の画像 1
    • Disconnect the connecting cord using tweezers.

  18. Samsung Alias 2 Hinge Replacement: 手順 18、 1の画像 1
    • Disconnect the rectangular ribbon.

  19. Samsung Alias 2 Hinge Replacement: 手順 19、 1の画像 1
    • Remove the logic board.

  20. Samsung Alias 2 Hinge Replacement: 手順 20、 1の画像 1
    • Remove the three 3.95 mm screws.

    • The two rightmost screws must be pulled out with tweezers after unscrewed.

  21. Samsung Alias 2 Hinge Replacement: 手順 21、 1の画像 1
    • Pull the hinge out.

終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

8人の作成者と共同で作成されました。

Chris

メンバー登録日: 04/16/11

133 ポイント

5のガイドは作成済み

チーム

Cal Poly, Team 12-35, Maness Spring 2011 Cal Poly, Team 12-35, Maness Spring 2011人のメンバー

CPSU-MANESS-S11S12G35

4 メンバー

10のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 7

今までの合計 4,285