Skip to main content

はじめに

This guide may be used to remove the internal speakers from the Samsung ATIV Book 9 Lite. Have a Phillips screw driver ready. Be sure to keep track of all screws and where they belong. While removing the speakers, be sure not to damage any cords connecting the speakers to the laptop. Lastly, be sure to dispose of the broken speakers properly.

  1. Put a protective lining such as a piece of cloth in between the screen and the keyboard when closed to protect your screen when performing this replacement. Turn the laptop upside down to show the screws holding the back cover on.
    • Put a protective lining such as a piece of cloth in between the screen and the keyboard when closed to protect your screen when performing this replacement.

    • Turn the laptop upside down to show the screws holding the back cover on.

    • Using the Phillips #0, remove the ten 4mm screws located around the edges and one central.

  2. Use two plastic opening tools to separate the back cover from the laptop. This may take some force because the back cover is snapped into place before the screws are used to keep it in place. This may take some force because the back cover is snapped into place before the screws are used to keep it in place.
    • Use two plastic opening tools to separate the back cover from the laptop.

    • This may take some force because the back cover is snapped into place before the screws are used to keep it in place.

  3. MacBook Battery 修理キット

    最低価格 $69.99

    Buy Now

    MacBook Battery 修理キット

    最低価格 $69.99

    Buy Now
  4. Using the Phillips #0, remove the seven 5mm screws highlighted in the image. Using your hands, disconnect the battery's main cord from the main motherboard. Using your hands, remove the battery from the computer.
    • Using the Phillips #0, remove the seven 5mm screws highlighted in the image.

    • Using your hands, disconnect the battery's main cord from the main motherboard.

    • Using your hands, remove the battery from the computer.

  5. Using a Phillips #1, remove the two 3mm screws, one per speaker. Using the nylon spudger, release the black and red wires that connect the two speakers. Using the nylon spudger, release the black and red wires that connect the two speakers.
    • Using a Phillips #1, remove the two 3mm screws, one per speaker.

    • Using the nylon spudger, release the black and red wires that connect the two speakers.

  6. Using your hands, remove the cord that connects the speakers to the board you are removing. Do not pull on the cord as that might damage it; remove it by pulling on the white wire head. Using your hands remove the speakers from the computer. This may require some force as they are held in place partially by double sided tape.
    • Using your hands, remove the cord that connects the speakers to the board you are removing.

    • Do not pull on the cord as that might damage it; remove it by pulling on the white wire head.

    • Using your hands remove the speakers from the computer. This may require some force as they are held in place partially by double sided tape.

まとめ

To reassemble your device, follow these instructions in reverse order.

Phat Tran

メンバー登録日: 2018年09月16日

672 ポイント

5のガイドは作成済み

チーム

Washington State, Team S2-G5, Hope Fall 2018 Washington State, Team S2-G5, Hope Fall 2018人のメンバー

WSU-HOPE-F18S2G5

4 メンバー

5のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 7

今までの合計 69