メインコンテンツにスキップ

はじめに

Follow this guide to remove a dead battery and replace it with a new one.

パーツ

パーツは指定されていません。

  1. Gently place the instrument upside-down on a soft surface.
    • Gently place the instrument upside-down on a soft surface.

    • Locate the battery cavity cap and screws.

  2. Use a phillips head screwdriver to unscrew both screws. Two #1 1mm long screws.
    • Use a phillips head screwdriver to unscrew both screws. Two #1 1mm long screws.

  3. PCラップトップ用バッテリー

    An easy fix for a big power boost.

    ショップを見る

    PCラップトップ用バッテリー

    An easy fix for a big power boost.

    ショップを見る
  4. Remove the cap by lifting upwards to reveal the battery. Remove the cap by lifting upwards to reveal the battery.
    • Remove the cap by lifting upwards to reveal the battery.

  5. Gently lift the battery from the cavity. Detach the battery completely by firmly pulling the fabric connector from the conducting end of the battery. Detach the battery completely by firmly pulling the fabric connector from the conducting end of the battery.
    • Gently lift the battery from the cavity.

    • Detach the battery completely by firmly pulling the fabric connector from the conducting end of the battery.

まとめ

To reassemble your device, follow these instructions in reverse order with a fresh battery.

ある他の人がこのガイドを完成しました。

Chris Pittner

メンバー登録日: 2013年01月11日

184 ポイント

7のガイドは作成済み

チーム

Cal Poly, Team 5-18, Forte Winter 2013 Cal Poly, Team 5-18, Forte Winter 2013人のメンバー

CPSU-FORTE-W13S5G18

4 メンバー

8のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 5

今までの合計 927