メインコンテンツにスキップ

Ryobi VC120 Motor Replacement

必要な工具と部品

  1. Ryobi VC120 Motor Replacement, Filter: 手順 1、 1の画像 1
    • Pull the black nose off of the body of the vacuum, by pushing in the orange button closest to the nose.

  2. Ryobi VC120 Motor Replacement: 手順 2、 2の画像 1 Ryobi VC120 Motor Replacement: 手順 2、 2の画像 2
    • Grab the filter with two fingers and slide it out.

  3. Ryobi VC120 Motor Replacement, Motor: 手順 3、 2の画像 1 Ryobi VC120 Motor Replacement, Motor: 手順 3、 2の画像 2
    • Using a Philips head screwdriver, remove the four screws located on the side panel of the vacuum.

    • There are two types of screws on this device. You may want to use a magnetic screw pad to organize your screws to be sure they return to their designated holes.

    • 4x 19.1mm

    • 1x 14.3mm

    • Once the screws are removed, you should be able to separate the side panel from the rest of the device.

  4. Ryobi VC120 Motor Replacement: 手順 4、 3の画像 1 Ryobi VC120 Motor Replacement: 手順 4、 3の画像 2 Ryobi VC120 Motor Replacement: 手順 4、 3の画像 3
    • Pull your motor out, and remove the black and red cables from the motor by hand.

終わりに

To reassemble your device, follow these instructions in reverse order.

3 の人々がこのガイドを完成させました。

作成者

4人の作成者と共同で作成されました。

Allison Schoch

メンバー登録日: 09/16/15

689 ポイント

4のガイドは作成済み

チーム

IUPUI, Team 2-4, Baechle Fall 2015 IUPUI, Team 2-4, Baechle Fall 2015人のメンバー

IUPUI-BAECHLE-F15S2G4

3 メンバー

8のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 4

今までの合計 776