Ryobi P516 Top Case Replacement

はじめに

The Ryobi ONE+ P516 reciprocating saw is a lightweight, cordless saw, designed with compact features that complete the task for any DIY projects around your home. In this replacement guide, you will learn how to disassemble the main case for the reciprocating saw. To avoid hazards, keep the tools away from mouths and always wear safety goggles while sawing.

必要な工具と部品

手順1 Top Case

Ryobi P516 Top Case Replacement, Top Case: 手順 1、 2の画像 1

Ryobi P516 Top Case Replacement, Top Case: 手順 1、 2の画像 2

Using the 5mm hex key included at the base of the saw, loosen the set screw at the front of the saw.
The front guard will now slide out from the front of the saw.

編集

手順2

Ryobi P516 Top Case Replacement: 手順 2、 3の画像 3

Remove the two 10mm T20 Torx screws from the front of the saw.
Pull out the front plate.

編集

手順3

Ryobi P516 Top Case Replacement: 手順 3、 3の画像 3

Start at the middle of the device and begin to pry up the rubber grip.
Pull the rubber portion inside out towards the front of the saw.

編集

手順4

Remove all twelve 14mm T20 Torx screws from the main case of the device.

編集

手順5

Ryobi P516 Top Case Replacement: 手順 5、 3の画像 3

Remove the four 35mm Phillips #2 screws.
Pry the two case halves apart starting at the middle of the saw.
Watch out for any loose parts from inside the saw that may fall out during this step.