Royal Kludge GK64 Keyboard Switch Spring Replacement

はじめに

Replace the switch spring inside your Royal Kludge GK64 keyboard key using this guide. Mechanical keyboard switch springs may need to be replaced in a number of circumstances. The key switch springs may eventually appear worn out from constant use or they may cease working completely. Because the process is similar for many mechanical keyboard models, these steps may also be useful for other mechanical keyboard models.

必要な工具と部品

手順1 Keyboard Switch Spring

Royal Kludge GK64 Keyboard Switch Spring Replacement, Keyboard Switch Spring: 手順 1、 2の画像 1

Royal Kludge GK64 Keyboard Switch Spring Replacement, Keyboard Switch Spring: 手順 1、 2の画像 2

Use a keycap remover to pull your keycap up and off of the keyboard.
Remove any keycaps surrounding the one you are working on if you need more space.

編集

手順2

Royal Kludge GK64 Keyboard Switch Spring Replacement: 手順 2、 3の画像 3

Use the switch puller to pull the desired switch out of your keyboard.

編集

手順3

Place your switch onto your switch opener, and gently push down.
Make sure the switch is securely in place and continue to remove the top housing.

編集

手順4

Royal Kludge GK64 Keyboard Switch Spring Replacement: 手順 4、 3の画像 3

Use the stem holder to remove the stem, which will reveal the switch spring.
Remove the switch spring.

編集

手順5

Align your new spring with the center of the bottom housing and gently place the switch spring.

編集

手順6

Royal Kludge GK64 Keyboard Switch Spring Replacement: 手順 6、 3の画像 3

To put the stem back, align the stem legs with the metal plate on the switch.
Remove the switch from the switch opener.
Gently push down onto the housing until you hear a click and both pieces are into place.