メインコンテンツにスキップ

修理を始めるには

修理する権利

ストア

はじめに

Prerequisite Only

パーツ

パーツは指定されていません。

  1. Ensure the Roku XDis unplugged. Take care when handling components.  Circuit boards, soldering points, and other areas may have sharp points. Turn the device upside down.
    • Ensure the Roku XDis unplugged.

    • Take care when handling components. Circuit boards, soldering points, and other areas may have sharp points.

    • Turn the device upside down.

    • Remove the two rubber pads using a plastic spudger.

  2. Remove the two Phillips #1 9mm pan-head screws. Remove the two Phillips #1 9mm pan-head screws.
    • Remove the two Phillips #1 9mm pan-head screws.

  3. 全てのタブを開く

    Mac用RAMアップグレードキット

    キット商品を見る

    どれだけタブを開いても
    十分に足りるRAM容量

    キット商品を見る
  4. Insert spudger between upper and lower frame underneath the port access. Guide spudger around to loosen upper and lower frame to pry frame apart. Gently remove upper frame.
    • Insert spudger between upper and lower frame underneath the port access.

    • Guide spudger around to loosen upper and lower frame to pry frame apart.

    • Gently remove upper frame.

  5. Remove the two Phillips #1 8mm pan-head screws. Remove the two Phillips #1 8mm pan-head screws.
    • Remove the two Phillips #1 8mm pan-head screws.

  6. On the side of the board opposite the ports, find and tilt back the tab securing the board in place.
    • On the side of the board opposite the ports, find and tilt back the tab securing the board in place.

    • Lift the motherboard out of the lower frame.

終わりに

To reassemble your device, follow these instructions in reverse order.

William

メンバー登録日: 2015年01月30日

1,543 ポイント

10のガイドは作成済み

チーム

University of Kentucky Louisville, Team 1-6, Rountree Winter 2015 University of Kentucky Louisville, Team 1-6, Rountree Winter 2015人のメンバー

LOUISVILLE-ROUNTREE-W15S1G6

4 メンバー

10のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 0

今までの合計 45