Roku Streaming Stick Motherboard Port replacement

この修理ガイドは変更されています。最新の未承認バージョンに切り替えます。

はじめに

There were over 10 million Roku Streaming Sticks sold in 2014 within the United States alone when it was released. This guide will show you how to repair and replace the ports on one of these devices.

As a precaution, this guide will require a soldering iron or gun.

必要な工具と部品

手順1 Roku Streaming Stick Motherboard Port

Roku Streaming Stick Motherboard Port replacement, Roku Streaming Stick Motherboard Port: 手順 1、 1の画像 1

Grab the blue plastic opening tool to open the Roku Streaming Stick 3500R.

翻訳

手順2

Place the blue plastic opening tool into one of the cracks on the back of the Roku to pop open the Roku Streaming Stick 3500R. Be careful not to break anything while removing the back.

翻訳

手順3

Once you have removed the cover, you can now access the motherboard of the Roku Streaming Stick.

翻訳

手順4

Remove the motherboard by grabbing a hold of the micro-usb port, or you can also use tweezers to grab a hold of it and pull it out. But be careful with where you grab the motherboard.

翻訳

手順5

Roku Streaming Stick Motherboard Port replacement: 手順 5、 3の画像 3

Once you identify the HDMI port and the micro-usb port, you can investigate to see which port may be damaged.

翻訳

手順6

Once you have identified the problem you can then desolder the points at the HDMI as highlighted, or at the micro-usb ports.
If the soldering gun, or iron is set too high you then run the risk of destroying the motherboard altogether, or even damaging the wireless antennas.

翻訳