修理を始めるには

修理する権利

ストア

Ring Doorbell Battery Replacement

作成者： Greg Beeblebrox (そして 6 人のその他投稿者)
  • コメント: 53
  • お気に入り: 2
  • 完了: 22

難易度

簡単

手順

5

所要時間

20 - 40 分

セクション

1

フラグ

5

Action Shots

アクションショット

アクションヒーローになりましょう！このガイドはある特定の動作をどのように行なうのか、より詳細な画像が必要です。

In Progress

進行中

このガイドは現在作成中です。最新の変更を見るために定期的に再読み込みしてください。

Needs Better Images

高画質の画像が必要

よりよい画像があればこのガイドが改善されます。よければ新しい写真を撮影し、編集し、アップロードしてお手伝いください。

Needs More Images

多くの画像が必要

幾つかの画像があればこのガイドの手順がより明確になるでしょう。

Member-Contributed Guide

メンバーによる寄稿ガイド

私たちのコミュニティーの素晴らしいメンバーがこのガイドを作成しました。これはiFixitスタッフによって管理されていません。

はじめに

This guide is to show how to open the Ring Doorbell to replace the battery. This is only for the 1st gen ring doorbells as newer versions do not have a battery and require full time power.

  1. Start by removing the 8 screws. the 4 black ones are hidden by the aluminum plate.

    • Start by removing the 8 screws. the 4 black ones are hidden by the aluminum plate.

    翻訳

  2. Pry the aluminum cover carefully off- this will reveal the 4 black screws underneath. You will need a micro phillips screwdriver to remove these tiny screws. Pry the aluminum cover carefully off- this will reveal the 4 black screws underneath. You will need a micro phillips screwdriver to remove these tiny screws.

    • Pry the aluminum cover carefully off- this will reveal the 4 black screws underneath. You will need a micro phillips screwdriver to remove these tiny screws.

    翻訳

  4. Carefully pry the plastic with a plastic pry tool to pop the insert out- watch the micro usb port that is sticking out...

    • Carefully pry the plastic with a plastic pry tool to pop the insert out- watch the micro usb port that is sticking out...

    翻訳

  5. carefully pull directly up on the connector. The battery MAY still be attached to the plate-so be careful.

    • carefully pull directly up on the connector. The battery MAY still be attached to the plate-so be careful.

    翻訳

  6. This battery is two Lithium polymer batteries connected in parallel to the regulator. The batteries are back to back and are rated at 9.47wh @ 3.75v each...I have yet to find this battery but assume it is available somewhere in raw form.

    • This battery is two Lithium polymer batteries connected in parallel to the regulator. The batteries are back to back and are rated at 9.47wh @ 3.75v each...I have yet to find this battery but assume it is available somewhere in raw form.

    翻訳
終わりに

To reassemble your device, follow these instructions in reverse order.

22 の人々がこのガイドを完成させました。

作成者

6他の投稿者と一緒に

Greg Beeblebrox

メンバー登録日: 2014年06月11日

722 ポイント

1ガイドが承認済み

バッジ: 12

+9 個以上のバッジ

48 件のコメント

コメントを追加

This is one of the few products that it's rarely if ever necessary to replace a battery in, as the warranty will cover a rapidly draining or not-charging battery. I'm glad you didn't tear down your chime, too! ;)

pyrodice - 返信

Where can the battery be purchased?

Mike Menendez - 返信

My ring doorbell is a little over a year old and battery is draining very fast so needs to be replaced. Ring says it is out of warranty and solution is to buy a new ring doorbell for $180. Not a good solution in my opinion. I just spent another $50 for the solar panel option (which is only compatible with the first generation ring doorbell) and this does not help so now I have $230 into this doorbell. If anyone knows where a replacement aftermarket battery can be purchased, I would appreciate this info.

bill hitchcock - 返信

Please see my post below. I believe there is hope brother….

John Sanders -

At ham radio festivals there is a guy they call Mr. NICAD. He builds batteries for people. Just ask him.

wx9dx -

コメントを追加

統計データを表示:

過去 24時間: 80

過去 7 日: 474

過去 30 日: 2,245

今までの合計 100,768