Ridgid Angle Grinder R10202 Disk Guard Spring Replacement - iFixit 修理ガイド

はじめに

This guide is for replacing the spring on your guard disk should the spring break or not feel firmly secure. For this task, you will want to have the replacement spring ready as it can be inserted directly after the last step.

必要な工具と部品

手順1 Disk Guard Spring

Ridgid Angle Grinder R10202 Disk Guard Spring Replacement, Disk Guard Spring: 手順 1、 1の画像 1

Unscrew the clamp nut and the backing flange from the output shaft assembly.
You can do this by hand or use a spanner wrench which should be provided in the manufacturers box.

手順2

Ridgid Angle Grinder R10202 Disk Guard Spring Replacement: 手順 2、 2の画像 1

Ridgid Angle Grinder R10202 Disk Guard Spring Replacement: 手順 2、 2の画像 2

Push in the guard lever and twist the guard until it aligns with the slots on the output shaft assembly.
There are two arrows that should align before you attempt to pull the pieces apart.

手順3

Ridgid Angle Grinder R10202 Disk Guard Spring Replacement: 手順 3、 2の画像 1

Ridgid Angle Grinder R10202 Disk Guard Spring Replacement: 手順 3、 2の画像 2

Unscrew the 5 M5 X 10mm screws using a Torx T20 Bit.
Carefully separate the spacer from the guard.

手順4

Ridgid Angle Grinder R10202 Disk Guard Spring Replacement: 手順 4、 2の画像 1

Ridgid Angle Grinder R10202 Disk Guard Spring Replacement: 手順 4、 2の画像 2

Gently push the spring away from the spacer.
The spacer, spring, and guard lever should now be all separate.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

2人の作成者と共同で作成されました。

Parker Massie

メンバー登録日: 01/10/19

607 ポイント

4のガイドは作成済み

+5 個以上のバッジ

チーム

Oregon Institute of Technology, Team S1-G2, Lancaster Winter 2019 Oregon Institute of Technology, Team S1-G2, Lancaster Winter 2019人のメンバー

OIT-LANCASTER-W19S1G2

4 メンバー

6のガイドは作成済み

0 件のコメント

統計データ:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 6

今までの合計 723