Ricoh YF-20 Super Lens Cover Replacement

作成者： Eric Dazet (そして 4 人のその他投稿者)

コメント: 0
お気に入り: 0

Ricoh YF-20 Super Lens Cover Replacement

難易度

普通

手順

所要時間

8 - 10 分

はじめに

This process involves removing the back cover, the front cover, and the zoom mechanism of the camera. After, the lens cover can be removed from the front cover.

ツール

これらのツールを購入する

Phillips #1 Screwdriver

$5.49

購入する

パーツ

パーツは指定されていません。

手順1 Front Cover

Unscrew the seven indicated screws from the left, right, bottom, and back sides of the camera.

Unscrew the seven indicated screws from the left, right, bottom, and back sides of the camera.

編集

手順2

Loosen the back cover from both the left and the right sides of the camera.

Remove back cover. The lid of the battery compartment may fall off because it is not attached to anything.

Loosen the back cover from both the left and the right sides of the camera.
Remove back cover. The lid of the battery compartment may fall off because it is not attached to anything.

編集

手順3

Press your finger on top of the grey latch on the left side of the camera.

Open the film compartment.
Press your finger on top of the grey latch on the left side of the camera.

編集

手順4

Removing the film compartment door is optional. However, it may aid maneuverability in future steps.

Use a thin object like a toothpick or a small screwdriver to push down on the metal pin holding the film compartment door in place.

Use your fingers to completely remove the metal pin.

Removing the film compartment door is optional. However, it may aid maneuverability in future steps.
Use a thin object like a toothpick or a small screwdriver to push down on the metal pin holding the film compartment door in place.
Use your fingers to completely remove the metal pin.
Remove the film compartment door.

編集

手順5

Using a thin shaft screwdriver, unscrew the two indicated screws within the film compartment.

Using a thin shaft screwdriver, unscrew the two indicated screws within the film compartment.

編集

手順6

Loosen the front cover from the left and right sides of the camera.

Loosen the front cover from the left and right sides of the camera.
Remove the front cover.

編集

手順7 Lens Cover

The lens cover is only attached to the front cover of the camera. Set the rest of the camera aside.

In order to reach the lens cover, the zoom mechanism must be removed.

Unscrew three screws from the front cover that hold the zoom mechanism in place.

The lens cover is only attached to the front cover of the camera. Set the rest of the camera aside.
In order to reach the lens cover, the zoom mechanism must be removed.
Unscrew three screws from the front cover that hold the zoom mechanism in place.
Remove the zoom mechanism.

編集

手順8

Unscrew the five screws that hold the lens cover plate and metal brace in place.

Unscrew the five screws that hold the lens cover plate and metal brace in place.
Remove metal brace.
Remove lens cover plate.

編集

手順9

To remove lens cover, push the lens cover from the outside of the front cover towards the inside of the front cover.

To remove lens cover, push the lens cover from the outside of the front cover towards the inside of the front cover.
Remove the lens cover.
The metal arm attached to the lens cover is not securely attached and may fall off.