修理を始めるには

修理する権利

パーツ＆ツール

Ricoh YF-20 Super Front Cover Replacement

作成者： Eric Dazet (そして 5 人のその他投稿者)
  • コメント: 0
  • お気に入り: 0
  • 完了: 1

難易度

普通

手順

6

所要時間

6 - 8 分

セクション

1

フラグ

3

Bullets!

箇条書き！

マークアップやブレットの色や形を変えてコーディネートしてみるとこのガイドをより見やすくできます。

Markup Mishap

間違いの指摘

このガイドは最適な校正が必要です。校正の注釈を付けたり訂正することにご協力ください。

Needs More Images

多くの画像が必要

幾つかの画像があればこのガイドの手順がより明確になるでしょう。

はじめに

This process involves removing the back cover and the front cover of the camera.

ツール

これらのツールを購入する

パーツ

パーツは指定されていません。

  1. Unscrew the seven indicated screws from the left, right, bottom, and back sides of the camera. Unscrew the seven indicated screws from the left, right, bottom, and back sides of the camera.

    • Unscrew the seven indicated screws from the left, right, bottom, and back sides of the camera.

    編集

  2. Loosen the back cover from both the left and the right sides of the camera. Remove back cover. The lid of the battery compartment may fall off because it is not attached to anything. Remove back cover. The lid of the battery compartment may fall off because it is not attached to anything.

    • Loosen the back cover from both the left and the right sides of the camera.

    • Remove back cover. The lid of the battery compartment may fall off because it is not attached to anything.

    編集

  3. Manta Driver Kit

    どんな修理にでも対応可能な112ビット

    Upgrade Your Toolbox

    Manta Driver Kit

    Upgrade Your Toolbox

  4. Open the film compartment. Press your finger on top of the grey latch on the left side of the camera. Press your finger on top of the grey latch on the left side of the camera.

    • Open the film compartment.

    • Press your finger on top of the grey latch on the left side of the camera.

    編集

  5. Removing the film compartment door is optional. However, it may aid maneuverability in future steps. Use a thin object like a toothpick or a small screwdriver to push down on the metal pin holding the film compartment door in place. Use your fingers to completely remove the metal pin.

    • Removing the film compartment door is optional. However, it may aid maneuverability in future steps.

    • Use a thin object like a toothpick or a small screwdriver to push down on the metal pin holding the film compartment door in place.

    • Use your fingers to completely remove the metal pin.

    • Remove the film compartment door.

    編集

  6. Using a thin shaft screwdriver, unscrew the two indicated screws within the film compartment. Using a thin shaft screwdriver, unscrew the two indicated screws within the film compartment.

    • Using a thin shaft screwdriver, unscrew the two indicated screws within the film compartment.

    編集

  7. Loosen the front cover from the left and right sides of the camera. Remove the front cover. Remove the front cover.

    • Loosen the front cover from the left and right sides of the camera.

    • Remove the front cover.

    編集
終わりに

To reassemble your device, follow these instructions in reverse order.

ある他の人がこのガイドを完成しました。

作成者

5他の投稿者と一緒に

Eric Dazet

メンバー登録日: 2012年04月10日

352 ポイント

5のガイドは作成済み

バッジ: 9

+6 個以上のバッジ

チーム

Cal Poly, Team 6-21, Amido Spring 2012 Cal Poly, Team 6-21, Amido Spring 2012人のメンバー

CPSU-AMIDO-S12S6G21

4 メンバー

14のガイドは作成済み

0 件のコメント

コメントを追加

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 3

今までの合計 287