メインコンテンツにスキップ

この修理ガイドは変更されています。最新の未承認バージョンに切り替えます。

Ricoh YF-20 Super Button Mechanism Replacement

必要な工具と部品

  1. Ricoh YF-20 Super Button Mechanism Replacement, Front Cover: 手順 1、 2の画像 1 Ricoh YF-20 Super Button Mechanism Replacement, Front Cover: 手順 1、 2の画像 2
    • Use the screwdriver to unscrew the indicated screws from the left, right, bottom, and back sides of the camera.

  2. Ricoh YF-20 Super Button Mechanism Replacement: 手順 2、 3の画像 1 Ricoh YF-20 Super Button Mechanism Replacement: 手順 2、 3の画像 2 Ricoh YF-20 Super Button Mechanism Replacement: 手順 2、 3の画像 3
    • Loosen the back cover from both the left and the right sides of the camera. Take off the back cover.

    • The lid of the battery compartment may fall off because it is not attached to anything.

  3. Ricoh YF-20 Super Button Mechanism Replacement: 手順 3、 3の画像 1 Ricoh YF-20 Super Button Mechanism Replacement: 手順 3、 3の画像 2 Ricoh YF-20 Super Button Mechanism Replacement: 手順 3、 3の画像 3
    • Open the film compartment.

    • Press your finger on top of the grey latch on the left side of the camera.

  4. Ricoh YF-20 Super Button Mechanism Replacement: 手順 4、 3の画像 1 Ricoh YF-20 Super Button Mechanism Replacement: 手順 4、 3の画像 2 Ricoh YF-20 Super Button Mechanism Replacement: 手順 4、 3の画像 3
    • Removing the film compartment door is optional. However, it may aid maneuverability in future steps.

    • Use a thin object like a toothpick or a small screwdriver to push down on the metal pin holding the film compartment door in place.

    • Use your fingers to completely remove the metal pin.

    • Remove the film compartment door.

  5. Ricoh YF-20 Super Button Mechanism Replacement: 手順 5、 2の画像 1 Ricoh YF-20 Super Button Mechanism Replacement: 手順 5、 2の画像 2
    • Use a thin shaft screwdriver and unscrew the two indicated screws within the film compartment.

  6. Ricoh YF-20 Super Button Mechanism Replacement: 手順 6、 3の画像 1 Ricoh YF-20 Super Button Mechanism Replacement: 手順 6、 3の画像 2 Ricoh YF-20 Super Button Mechanism Replacement: 手順 6、 3の画像 3
    • Loosen the front cover from the left and right sides of the camera.

    • Take off the front cover.

  7. Ricoh YF-20 Super Button Mechanism Replacement, Ricoh YF-20 Super Button Mechanism Replacement: 手順 7、 3の画像 1 Ricoh YF-20 Super Button Mechanism Replacement, Ricoh YF-20 Super Button Mechanism Replacement: 手順 7、 3の画像 2 Ricoh YF-20 Super Button Mechanism Replacement, Ricoh YF-20 Super Button Mechanism Replacement: 手順 7、 3の画像 3
    • Remove and set the front and back covers aside

    • Remove the screw that holds the front plate brace in place.

    • Remove brace.

  8. Ricoh YF-20 Super Button Mechanism Replacement: 手順 8、 3の画像 1 Ricoh YF-20 Super Button Mechanism Replacement: 手順 8、 3の画像 2 Ricoh YF-20 Super Button Mechanism Replacement: 手順 8、 3の画像 3
    • Unscrew the four screws keeping the front face plate in place.

    • The top left screw also holds a metal clip in place.

    • Remove metal clip.

  9. Ricoh YF-20 Super Button Mechanism Replacement: 手順 9、 3の画像 1 Ricoh YF-20 Super Button Mechanism Replacement: 手順 9、 3の画像 2 Ricoh YF-20 Super Button Mechanism Replacement: 手順 9、 3の画像 3
    • After removing the metal clip in the previous step, the front face plate can be removed.

    • The front face plate is attached to the camera body by two small wires. Carefully remove the plate and completely separate it from the camera body.

  10. Ricoh YF-20 Super Button Mechanism Replacement: 手順 10、 3の画像 1 Ricoh YF-20 Super Button Mechanism Replacement: 手順 10、 3の画像 2 Ricoh YF-20 Super Button Mechanism Replacement: 手順 10、 3の画像 3
    • Unscrew the two screws that hold the button mechanism in place.

    • Press down on button mechanism to unlatch it from the camera body. When pressed down, the bottom of the mechanism should push outward.

  11. Ricoh YF-20 Super Button Mechanism Replacement: 手順 11、 3の画像 1 Ricoh YF-20 Super Button Mechanism Replacement: 手順 11、 3の画像 2 Ricoh YF-20 Super Button Mechanism Replacement: 手順 11、 3の画像 3
    • Lift the button mechanism up carefully, removing the spring at the top of the mechanism from where it is attached to the camera body.

    • Remove the button mechanism.

終わりに

To reassemble your device, follow these instructions in reverse order.

作成者

10人の作成者と共同で作成されました。

Eric Dazet

メンバー登録日: 04/10/12

352 ポイント

5のガイドは作成済み

チーム

Cal Poly, Team 6-21, Amido Spring 2012 Cal Poly, Team 6-21, Amido Spring 2012人のメンバー

CPSU-AMIDO-S12S6G21

4 メンバー

18のガイドは作成済み

0 件のコメント

コメントを追加

統計データ:

過去 24時間: 0

過去 7 日: 3

過去 30 日: 28

今までの合計 1,106