メインコンテンツにスキップ

はじめに

A common type of ironing board has a lever fixed by a metal plate that is supposed to allow the legs to open and close. However, the metal plate can be damaged. When that happens, the ironing board will not be able to open and stand up. Need to iron clothes but ironing board doesn't stay up? Check out our repair guide to learn how to replace the broken metal plate of the ironing board!

  1. Place the ironing board face down on a flat, stable surface.
    • Place the ironing board face down on a flat, stable surface.

  2. Unscrew and remove the broken metal plate.
    • Unscrew and remove the broken metal plate.

  3. Cut the metal sheet into an appropriate size.
    • Cut the metal sheet into an appropriate size.

    • Use cut proof gloves for protection

  4. iPhoneのバッテリーキット

    Only $29.99

    Buy Now

    iPhoneのバッテリーキット

    Only $29.99

    Buy Now
  5. Using a 1/8" drill bit, drill four holes on each corner where the screws will be placed.
    • Using a 1/8" drill bit, drill four holes on each corner where the screws will be placed.

    • Use cut proof gloves for protection

  6. On the corner of a flat edge, use a mallet to shape the metal sheet.
    • On the corner of a flat edge, use a mallet to shape the metal sheet.

    • Keep your hand at a distance from the mallet to avoid hitting your fingers.

  7. Using a screwdriver, screw on the new plate with the #10-32 x 3/8" pan-headed screws.
    • Using a screwdriver, screw on the new plate with the #10-32 x 3/8" pan-headed screws.

  8. Finish repairing the iron board! Finish repairing the iron board!
    • Finish repairing the iron board!

まとめ

To reassemble your device, follow these instructions in reverse order.

2 の人々がこのガイドを完成させました。

Nina Youn

メンバー登録日: 2018年10月26日

184 ポイント

1ガイドが承認済み

チーム

UC Davis, Team S2-G1, Bender Fall 2018 UC Davis, Team S2-G1, Bender Fall 2018人のメンバー

UCD-BENDER-F18S2G1

4 メンバー

1のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 11

過去 30 日: 46

今までの合計 241