メインコンテンツにスキップ

パーツ

パーツは指定されていません。

  1. Start by first removing the battery. Move the first release switch to the right position.
    • Start by first removing the battery.

    • Move the first release switch to the right position.

    • Move the second release switch to the right position while pulling the battery towards the top of the netbook.

  2. Using the bit driver and a Phillips #0 bit, remove the three circled screws, 5 mm in length.
    • Using the bit driver and a Phillips #0 bit, remove the three circled screws, 5 mm in length.

  3. While holding the top of the netbook, flip the netbook over. While holding the top of the netbook, flip the netbook over.
    • While holding the top of the netbook, flip the netbook over.

  4. Carefully lift off the power bar assembly for access to the button and receiver. Carefully lift off the power bar assembly for access to the button and receiver.
    • Carefully lift off the power bar assembly for access to the button and receiver.

終わりに

To reassemble your device, follow these instructions in reverse order.

Mason McCaskill

メンバー登録日: 2013年10月18日

964 ポイント

9のガイドは作成済み

チーム

Clemson, Team 14-2, Benson Fall 2013 Clemson, Team 14-2, Benson Fall 2013人のメンバー

CLEM-BENSON-F13S14G2

3 メンバー

9のガイドは作成済み

0 件のコメント

コメントを追加

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 2

今までの合計 316