パーツ

パーツは必要ありません。

Press down on the button located at the bottom of the phone, using the center ridge as a guide. Pull the phone apart from the bottom, keeping the button pressed down.
  • Press down on the button located at the bottom of the phone, using the center ridge as a guide.

  • Pull the phone apart from the bottom, keeping the button pressed down.

  • CAUTION! The plastic opening tool may be used to gain leverage. Some force is required to open.

コメントを追加する

Remove the back cover to expose the battery.
  • Remove the back cover to expose the battery.

コメントを追加する

Place a finger or plastic opening tool in the gap between the battery and the phone. Gently lift the battery out.
  • Place a finger or plastic opening tool in the gap between the battery and the phone.

  • Gently lift the battery out.

コメントを追加する

Locate the plastic latches on the left and right sides of the phone. Insert the plastic opening tool or a fingernail into each latch and pry them open individually.
  • Locate the plastic latches on the left and right sides of the phone.

  • Insert the plastic opening tool or a fingernail into each latch and pry them open individually.

  • CAUTION! Some force is required.

コメントを追加する

Remove the faceplate with the number pad attached.
  • Remove the faceplate with the number pad attached.

コメントを追加する

Turn the faceplate so the number pad faces downward.
  • Turn the faceplate so the number pad faces downward.

  • Lift the number pad out of the faceplate.

  • Apply new faceplate.

  • Follow the instructions in reverse order to reassemble the phone.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Ian VanZandt

メンバー登録日: 2012年02月14日

600 ポイント

9のガイドは作成済み

チーム

James Madison, Team 3-1, Klein Spring 2012 James Madison, Team 3-1, Klein Spring 2012人のメンバー

JMU-KLEIN-S12S3G1

3 メンバー

9のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 301