はじめに

How to remove the keyboard cover.

Remove the 7 mm Philip screws.
  • Remove the 7 mm Philip screws.

  • Remove the 10 mm Philip screws.

  • Remove the 14 mm Philip screw.

コメントを追加する

Open the flap on the left hand side. Open the flap on the left hand side.
  • Open the flap on the left hand side.

コメントを追加する

Insert the iPod opening tools between the right and left sides of the latch. Pry the right side  of the latch, and then pry the left side to detach the laptop's cover.
  • Insert the iPod opening tools between the right and left sides of the latch.

  • Pry the right side of the latch, and then pry the left side to detach the laptop's cover.

コメントを追加する

Open the flap on the right side. Open the flap on the right side.
  • Open the flap on the right side.

コメントを追加する

Insert the iPod opening tools towards the right side of the latch.
  • Insert the iPod opening tools towards the right side of the latch.

  • Gently pry the right side out to release the top cover.

コメントを追加する

Lift the keyboard slowly. A cable connects the keyboard to the motherboard. If you are not careful, you will damage the cable.
  • Lift the keyboard slowly.

  • A cable connects the keyboard to the motherboard. If you are not careful, you will damage the cable.

コメントを追加する

Use your fingers or a spudger to detach the connector.
  • Use your fingers or a spudger to detach the connector.

コメントを追加する

Carefully lift and remove the keyboard. Carefully lift and remove the keyboard.
  • Carefully lift and remove the keyboard.

コメントを追加する

まとめ

To reassemble your device, follow these instructions in reverse order.

Derek Driscoll

メンバー登録日: 2010年04月15日

110 ポイント

16のガイドは作成済み

チーム

Cal Poly, Team 26-27, Regan Spring 2010 Cal Poly, Team 26-27, Regan Spring 2010人のメンバー

CPSU-REGAN-S10S26G27

3 メンバー

18のガイドは作成済み

コメントを追加する

統計データを表示:

過去 24時間: 0

過去 7 日: 0

過去 30 日: 1

今までの合計 1,451