はじめに

The tools and steps in this guide can be applied by a FiYer(Fix-it-Yourselfer) to repairing various wooden toys not just toy trains

ツール

パーツ

パーツは必要ありません。

  1. Locate all the missing wooden parts of the toy.
    • Locate all the missing wooden parts of the toy.

    • Clean the toy and parts so they are free from food and grime

  2. Tools needed:
    • Tools needed:

    • - Sandpaper 150 grit

    • - Good quality wood glue

  3. Sand the part of the wooden smoke stack that is going to be fixed to the steam locomotive
    • Sand the part of the wooden smoke stack that is going to be fixed to the steam locomotive

    • Clean the wood dust

  4. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    当社のショップを閲覧する
  5. Sanded and cleaned part free of dust and old glue
    • Sanded and cleaned part free of dust and old glue

  6. Apply a thin and even layer of wood glue to the sanded portion
    • Apply a thin and even layer of wood glue to the sanded portion

  7. Fix the smoke stack to the steam engine
    • Fix the smoke stack to the steam engine

    • Clean the excess glue around the joint with a paper towel

  8. Choo-choo, the steam locomotive is as good as new.
    • Choo-choo, the steam locomotive is as good as new.

まとめ

To reassemble your device, follow these instructions in reverse order.

claudius

メンバー登録日: 2010年12月12日

29 ポイント

2のガイドは作成済み

統計データを表示:

過去 24時間: 0

過去 7 日: 1

過去 30 日: 2

今までの合計 2,323